A resin set of exterior details for the P-51D Mustang fighter in 1:72 scale from the Czech brand CMK. It is not a kit of the aircraft but an accessory that refines the exterior areas of a plastic model.
Responsibility details are not available.
An accessory set cast in modeling resin, intended for a plastic model of the P-51D Mustang fighter in 1:72 scale. It is neither a stand-alone model nor a complete kit; without the base plastic kit of the aircraft you will not build it. The purpose of the set is to replace selected exterior areas of the model with parts with a sharper rendering of the surface than injected plastic allows. The exact composition of the package is not stated here, so before building, compare the shape of the parts with the model you are working on.
The P-51D was the most numerously built version of the American North American Mustang fighter. It can be told from the older versions at first glance: it has a lowered fuselage spine and a bubble canopy with a view in all directions. It was powered by a liquid-cooled Packard V-1650 V12, a license-built version of the British Rolls-Royce Merlin engine, which gave the aircraft its performance at high altitude. It was precisely the combination of range and high-altitude performance that determined its main role, escorting formations of bombers on long routes.
The resin castings are held on casting blocks that have to be separated. Cut the block off with a fine-toothed saw and never snap it, as resin is brittle and will crack right at the joint. Level the remainder of the block with a file and check against the light that the surface seats with no gap. Then wash the parts in lukewarm water with detergent; residues of the mold release agent cling to the surface and neither glue nor an undercoat will hold over them. They are glued with cyanoacrylate glue or with slow-setting epoxy; ordinary cement for polystyrene does not work here at all. Before painting, apply a thin base, as the metal surfaces of the Mustang are polished only on a smooth undercoat.
The set is an accessory for a plastic kit, not a stand-alone model. It is supplied unassembled and unpainted; glue, paints and the base kit are not included in the package.
Naši poradci a znalci sortimentu jsou připraveni odpovídat na Vaše dotazy (Po–Pá, 8–18 hod).
Zeptejte se na co potřebujete, odpovíme co nejdříve.
Texts from customers in the advice section reflect solely the opinions and views of the customers. MNF trade s.r.o. does not approve or verify customer texts in advance.
There are no questions here yet. Be the first to ask!