1:72 REPUBLIC F105D THUNDERCHIEF

What the sheet is for

In 1:72 scale even large inscriptions on a fuselage measure only a few millimeters. Printed decals are therefore the only way to get a legible number, warning inscription or insignia onto a model without blurred edges. The sheet is intended for a model of the F-105D Thunderchief; the manufacturer's instructions show the placement of the individual elements.

The real subject

The F-105D is an American single-seat supersonic fighter-bomber from the 1950s. It was built as a heavy strike machine with a swept wing, an internal bomb bay in the fuselage and unusually large dimensions for a single-engine aircraft. It flew the most combat hours over Southeast Asia, where it carried its bomb load on external pylons.

Application procedure

Before application, check in the instructions whether these are wet decals or a self-adhesive form. A wet decal separates from the backing after soaking in lukewarm water, while a self-adhesive element is ruined by soaking, so do not try it blind. Transfer small elements with tweezers or the tip of a damp brush, never slide them with a fingernail. The base has to be smooth and glossy, otherwise air will stay under the decal and the edge will lighten once dry. Clear coat the model with gloss paint before application, therefore, and once the decals are dry even the surface out with a matte or semi-gloss clear coat according to how the machine is to look.

• a decal sheet for a model of the F-105D Thunderchief in 1:72 scale
• crisp printing of small inscriptions and insignia
• handling with tweezers or a damp brush, not with a fingernail
• the base should be smooth and glossy
• the final clear coat hides the edges of the elements

Terms of supply

A decal sheet is supplied. The kit, paints and clear coats are not part of the delivery, unless stated otherwise.