1:72 Supermarine Spitfire PR.XI canopy airbrush mask

1:72 Supermarine Spitfire PR.XI canopy airbrush mask

3.96 €
Add to Cart

1:72 Supermarine Spitfire PR.XI canopy airbrush mask

1:72 Supermarine Spitfire PR.XI canopy airbrush mask is a masking set from MH models for spraying the cockpit frames onto a model of the reconnaissance Spitfire PR.XI in 1:72 scale.

Scale1:72
Manufacturer MH models
Product EAN8591111434638

Responsibility details are not available.

3.96 €
3.27 € without VAT
1 pcs in stock
Free shipping on orders over 1,000 czk in czech republic Personal pickup in Prostějov 14-day returns

About product

1:72 Supermarine Spitfire PR.XI canopy airbrush mask - a masking set from MH models

A masking set from MH models for models of the photo-reconnaissance Spitfire PR.XI in 1:72 scale. The masks are stuck onto the clear part of the cockpit, which is sprayed over with the color of the frames, and the masks are removed afterwards. The frames come out exactly along the engraved lines and even in width, which is hard to achieve with a brush in the small 1:72 scale. It is not a model but an accessory to a kit.

The real subject

The Spitfire PR.XI was the unarmed photo-reconnaissance version of the British fighter, powered by a Merlin V12 engine. In place of armament it carried photographic equipment in the rear of the fuselage and an increased fuel load, which gave it markedly greater range than the combat variants. Its identifying marks are the deeper nose profile given by the enlarged oil tank and the clean wing leading edges without gun ports. The machines flew over the continent alone and relied on speed and altitude rather than on defense.

Use and masking tips

Lift the pieces out of the sheet one at a time with the tip of a scalpel. Offer each one up to the glazing and press it into the engraved edges of the frame, so that no air is left under the edge - with small parts in 1:72 that is the most important step of the whole job. Cover the inside of the cockpit with a piece of damp tissue and the adjacent areas of the fuselage with ordinary masking tape. Spray the shade of the interior of the frames first and the external finish once that is dry, both very thinly. Take the masks off with tweezers shortly after they have dried, pulling at a slight angle. Small irregularities of the edge are evened out by a thin layer of clear varnish applied at the end.

Who the set is for

  • Builders of British fighters and reconnaissance aircraft in 1:72
  • Modelers who want sharp frames even in a small scale
  • Anyone interested in the less usual, unarmed versions of the Spitfire
  • Airbrush users

This is not a model of the aircraft and not a kit. Paints, varnish and the base model are not included in the package.

Reviews

No reviews yet Have you built this one? Tell other modellers how it went and help them choose.

Forum

Naši poradci a znalci sortimentu jsou připraveni odpovídat na Vaše dotazy (Po–Pá, 8–18 hod).
Zeptejte se na co potřebujete, odpovíme co nejdříve.

Texts from customers in the advice section reflect solely the opinions and views of the customers. MNF trade s.r.o. does not approve or verify customer texts in advance.

There are no questions here yet. Be the first to ask!

FAQ

No, it is a masking set for the cockpit glazing. A Spitfire PR.XI model in 1:72 has to be bought separately.

It was unarmed and carried photographic equipment and an increased fuel load. The wing has no gun ports and the nose has a deeper profile.

Yes, provided they work one piece at a time and press the edges down carefully. In 1:72 scale the pieces are small, so fine-tipped tweezers come in handy.

It is not essential, but a thin layer of clear varnish evens out the transition between the frame and the glass and the whole looks more unified.

Last seen

MH modelsMHX720671:72

1:72 Supermarine Spitfire PR.XI canopy airbrush mask

1:72 Supermarine Spitfire PR.XI canopy airbrush mask is a masking set from MH models for spraying the cockpit frames onto a model of the reconnaissance Spitfire PR.XI in 1:72 scale.
In stock
3.96 €
Print ScalePRSC481631:48

1:48 Grumman F-14 Tomcat Pt.1 (wet decals)

Grumman F-14 Tomcat, part 1 — decals in 1:48 scale from the manufacturer Print Scale. A water-slide sheet with the markings of the legendary carrier fighter of the US Navy.
In stock
19.16 €
First to fightFTF0771:72

1:72 Field Gun 75mm wz.1902/26

1:72 Field Gun 75mm wz.1902/26 is a plastic kit of the Polish 75 mm field gun in 1:72 scale from the Polish manufacturer First to Fight.
In stock
9.96 €
Kits-WorldKW3D1320031:32

1:32 USAAF Fighter Seat Belt Set

1:32 USAAF Fighter Seat Belt Set is a Kits-World decal sheet with three-dimensional color seat belts for American fighters in 1:32 scale.
In stock
7.96 €
VallejoVAL72453

Xpress Military Yellow Acrylic

A damped military yellow shade. An Xpress Color acrylic paint for desert equipment, tarpaulins and markings.
In stock
3.56 €
AMMO of Mig JimenezA.MIG-1259

STREAKINGBRUSHER STARSHIP GRIME

Streakingbrusher Starship Grime is a ready-to-use AMMO enamel weathering product with a brush in the cap for effects of running streaks and grime.
In stock
3.16 €
Voyager ModelVPE480241:48

1:48 KING TIGER HENSCHEL

Voyager Model 1:48 King Tiger with the Henschel turret is an extensive photo-etched add-on set for a plastic kit, not a model. The scope matches a full set, so reckon with a large number of parts and with long sheet-metal pieces.
In stock
20.76 €
Loading, please wait...

Setting consent to personalization

With your consent, we may use the information below for the following purposes or share it with selected partners. You can adjust your settings for individual purposes (types of processing) and confirm your choice with the "Save settings" button:

Always active

Necessary cookies

These are technical files that are necessary for the correct behavior of our website and all its functions. They are used, among other things, to store products in the shopping cart, display products on request, control filters, personal settings and also set consent to the use of cookies. Your consent is not required for these cookies and it is not possible to remove it.

Analytical cookies

They count website traffic and, by collecting anonymous statistics, enable the operator to better understand their visitors and thus constantly improve the site.

Marketing cookies

They collect information to better tailor advertising to your interests, both on and off this website.

Setting consent to personalization

To make it easier for you to browse the site, to offer you customized content or advertising, and to analyze traffic anonymously, we use cookies that we share with our partners for social media, advertising, and analytics. You can adjust their settings with the "Edit settings" link and you can change it at any time in the footer of the website. You can find more detailed information in our Policy on the protection of personal data and the use of cookies.