A triangular melt head of 2.5 mm forms the narrower wedge tip of a heated tool for finer seams and scratches in plastic.
Responsibility details are not available.
The same shape, a finer bite. The triangular cross section given in the name together with the value of 2.5 mm creates a seam with a sharp bottom, only noticeably smaller, so it suits even where the detail is dense. Anyone who works with vehicles and equipment in the middle range of scales will value the fact that the mark does not overpower the rivets or the engraved lines in the neighborhood.
Start where the result will be least visible, and only after a few strokes move to an exposed surface. Lead the tip smoothly and shorten the path; a small seam arises quickly and is easily drawn over the edge of a part. Once cooled, the edges can be softened by going over them lightly with a sanding sponge, so that they do not form a sharp ridge. It serves just as well where the seam between two parts is to be apparent, parts that in reality never seated completely tightly.
For builders who do damage discreetly and want the viewer to notice it only after a while. It serves well in repairing edges that were knocked by accident during the build too. Do not lay a hot tip on a plastic bench top, it will burn through it before you manage to notice. What the tip is made of and what it clamps into is not contained in the name of the item.
Naši poradci a znalci sortimentu jsou připraveni odpovídat na Vaše dotazy (Po–Pá, 8–18 hod).
Zeptejte se na co potřebujete, odpovíme co nejdříve.
Texts from customers in the advice section reflect solely the opinions and views of the customers. MNF trade s.r.o. does not approve or verify customer texts in advance.
There are no questions here yet. Be the first to ask!