A melt head with a rectangular profile of 2.9 mm is an interchangeable working tip for a heated modeling pen; the shape and the dimension are given in the name.
Responsibility details are not available.
According to the name this tip has a rectangular cross section and a dimension of 2.9 mm, which among rectangular profiles is one of the wider variants. The impression has a flat bottom and distinct sides, so it leaves behind a right-angled mark with a sharp transition. That is exactly what is wanted wherever a surface is to look as if after an impact or a rough intervention, not after careful work with a file.
A wider profile passes more heat into the plastic at once and the mark comes out deeper than you expect. Shorten the time of contact therefore and rather help yourself with a second pass over the same place. A test on an offcut tells you how the particular mix behaves and saves you a repair on a finished part. If the mark finally seems too soft, draw it out with a sharp graver once it has cooled.
For builders of equipment in larger scales and for diorama scenes with wrecks and damaged parts, where every surface is visible. Let a heated tip cool on a nonflammable surface and never set it down on the model being built. Neither the device the head clamps into nor its material is given in the name of the item, so compare the holder with your own tool.
Naši poradci a znalci sortimentu jsou připraveni odpovídat na Vaše dotazy (Po–Pá, 8–18 hod).
Zeptejte se na co potřebujete, odpovíme co nejdříve.
Texts from customers in the advice section reflect solely the opinions and views of the customers. MNF trade s.r.o. does not approve or verify customer texts in advance.
There are no questions here yet. Be the first to ask!