A circular melt head of 3.0 mm leaves a round impression in plastic; it is an interchangeable working tip for a heated pen.
Responsibility details are not available.
The round cross section given in the name together with the value of 3.0 mm does what angular shapes cannot: it leaves behind a round mark without corners that can be repeated side by side without a right-angled grid arising. And a circle is at the same time the shape that appears on real equipment all the time, from bullet holes through the impressions of bolt heads to hollowed seats.
With a round shape it is easy to slip into regularity, and that kills the result. Vary the depth, now and then apply only the edge of the tip and leave the distances between impressions unequal. If you want a hole right through, apply the tip from the back of the part; on the face side a naturally frayed edge then arises that can be refined with a sharp blade once it has cooled. Derive the layout of the impressions from the direction the hit would have come from; a group of marks with a common axis looks more believable than a random scatter.
Builders of combat equipment, wrecks and industrial scenes, where round shapes repeat in every second row of details. Never try to cool the tip with water, a sudden cooling does it no good and boiling drops can spatter. What material was used for the tip and what it clamps into is not given in the name of the item.
Naši poradci a znalci sortimentu jsou připraveni odpovídat na Vaše dotazy (Po–Pá, 8–18 hod).
Zeptejte se na co potřebujete, odpovíme co nejdříve.
Texts from customers in the advice section reflect solely the opinions and views of the customers. MNF trade s.r.o. does not approve or verify customer texts in advance.
There are no questions here yet. Be the first to ask!