3x Big Energy Walls - Phosphorescent Orange

Three tall barriers for large figures

The taller form answers the situation where a low barrier is lost on a table. The barrier is ten centimeters long and six centimeters tall, so it covers even a taller figure or the side of a vehicle and the boundary of a zone is distinct from any angle. In the package there are three such pieces and three stands measuring ten by two centimeters.

The material is phosphorescent in an orange shade and its thickness comes to two and a half millimeters. The larger area at the same time means more charged glow, because the glowing surface is roughly two and a half times as extensive as on the lower variant. In a darker room the taller pieces therefore keep glowing more noticeably and frame a scene better.

When to reach for the taller variant

For games with large models, robotic figures or vehicles the taller barrier tends to be the only one that makes sense. It also suits as the background of a photograph of a model, where a colored glowing area works in place of a backdrop and gives the shot depth. Three pieces are enough to put together a corner or a short corridor; anyone who needs a longer stretch combines them with the lower pieces of the same family.

Storage is easy, because the parts slide out of the stands and are stored flat side by side. Before longer storage it pays off to wipe the dust off the surface so that the glow does not lose strength. Anyone who uses the set often will appreciate that the parts do not deform even after many assemblies and disassemblies, because the material is stiff enough at this thickness and does not work with the temperature of the room. The package thus lasts many gaming evenings with no visible harm.