Weeds of European verges and field margins in 1:35 — a larger package of 3D printed vegetation from the German workshop RT-Diorama for overgrown roadsides and ditches.
Responsibility details are not available.
A larger set of 3D printed plants in 1:35 scale from the German workshop RT-Diorama, aimed at the growth that in western Europe grows along roads, on verges and in ditches. That is a different brief from a continuous ground-level carpet: here the point is tall, free-standing plants that form an irregular overgrown strip along a road and frame a roadway or a set of tracks well.
In the temperate zone of Europe, verges and ditches are the richest in weeds: the soil there is disturbed and damp and nobody mows it. Alongside the grasses, tall broadleaf plants hold on there, which turn brown and dry out by the end of summer while fresh green stays down at the ground. It is exactly that two-color growth that gives a roadside scene its credibility.
Separate the plants from the print supports with a sharp scalpel and set them out dry along the edge of the road before you start gluing, as a strip of weeds should have an irregular edge and gaps here and there. Glue with cyanoacrylate glue (super glue). After a base coat from an airbrush or a spray can, vary the shade of each group slightly and take the tips of the plants over into straw yellow; a dust pigment at the ground will then tie the whole strip to the surface of the roadway.
This is not a vehicle or aircraft kit but a scenic accessory for the terrain. The set is supplied unpainted; glue, paints and a base are not included in the package, unless stated otherwise.
Naši poradci a znalci sortimentu jsou připraveni odpovídat na Vaše dotazy (Po–Pá, 8–18 hod).
Zeptejte se na co potřebujete, odpovíme co nejdříve.
Texts from customers in the advice section reflect solely the opinions and views of the customers. MNF trade s.r.o. does not approve or verify customer texts in advance.
There are no questions here yet. Be the first to ask!