Leopard 2 120 mm L/44 barrel, 1:35 — a 3D-printed resin accessory from GINGER CAT.
Responsibility details are not available.
A 3D-printed resin barrel of the 120 mm smoothbore tank gun with a length of 44 calibers, for a model of the Leopard 2 tank in 1:35 scale from GINGER CAT. The manufacturer gives one piece in the package. The barrel goes on in place of the plastic part and offers a circular cross-section with no mold seam; on a modern smoothbore barrel with a thermal sleeve an accurate outline is especially noticeable.
The Leopard 2 is a German main battle tank introduced at the end of the 1970s. Its weapon is a 120 mm smoothbore gun that became the standard for NATO tanks and that the American Abrams carries as well. The version with a barrel length of 44 calibers belongs to the Leopard 2 forms up to the A4 variant and carries the characteristic ribbed thermal sleeve. Later versions received a longer barrel with a length of 55 calibers, which is distinctly longer to the eye.
3D-printed parts are small and brittle: separate them with a fine-tooth saw or with nippers and level the remains of the print supports with a fine file. They are glued with cyanoacrylate glue (super glue); solvent cement for plastic does not hold. Before painting, spray a thin coat of primer, as a heavy coat would drown the detail.
The accessory is supplied unassembled and unpainted. The model, glue and paints are not included in the package, unless stated otherwise.
Naši poradci a znalci sortimentu jsou připraveni odpovídat na Vaše dotazy (Po–Pá, 8–18 hod).
Zeptejte se na co potřebujete, odpovíme co nejdříve.
Texts from customers in the advice section reflect solely the opinions and views of the customers. MNF trade s.r.o. does not approve or verify customer texts in advance.
There are no questions here yet. Be the first to ask!