Turned barrels for the early T-28 in 1:35 scale from Aber: a 76.2 mm gun and three machine gun barrels. It is not a kit.
Responsibility details are not available.
A set of turned metal barrels in 1:35 scale for a model of the Soviet T-28 medium tank in its early form. It contains one barrel of the 76.2 mm KT-28 gun and three 7.62 mm DT machine gun barrels. It is not a kit but a replacement for the plastic parts.
The T-28 was a Soviet multi-turret medium tank of the 1930s. The main turret carried a short gun for infantry support, and in front of it stood two smaller turrets with machine guns, so the vehicle could fire at several targets at once. The concept proved to be a dead end, because the commander could not direct the fire of every turret, but as a subject the T-28 is rewarding precisely because of that unusual silhouette.
Cut the plastic barrel off as close to the turret as possible and drill the seating so that the pin of the metal barrel sits firmly without passing right through. Degrease the metal with alcohol and apply a primer, otherwise the paint will not hold on the smooth surface. It is bonded with super glue, that is, cyanoacrylate, applied drop by drop. Fit the barrel at the very end of the build so that it is not bent during handling, and check its axis by eye from the front while the glue sets. The machine gun barrels are very thin, so fit them last of all and do not touch them when handling the model.
The set is supplied unassembled and unpainted. Glue, paints and accessories are not included in the package, unless stated otherwise.
Naši poradci a znalci sortimentu jsou připraveni odpovídat na Vaše dotazy (Po–Pá, 8–18 hod).
Zeptejte se na co potřebujete, odpovíme co nejdříve.
Texts from customers in the advice section reflect solely the opinions and views of the customers. MNF trade s.r.o. does not approve or verify customer texts in advance.
There are no questions here yet. Be the first to ask!