1:48 B-58 Hustler wheels w/ weighted tyres

Resin wheels with weighted tires for a model of the Convair B-58 Hustler bomber in 1:48 scale from the Ukrainian maker Armory. An accessory for a model, not a kit.

Scale1:48
Manufacturer Armory
Product EAN8591111696425

Responsibility details are not available.

20.36 €
16.83 € without VAT
In stock
Free shipping on orders over 1,000 czk in czech republic Personal pickup in Prostějov 14-day returns

About product

B-58 Hustler in 1:48 scale - resin wheels from the maker Armory

A set of cast wheels with weighted tires for a model of the American supersonic bomber Convair B-58 Hustler in 1:48 scale. It is not an aircraft kit but an accessory that replaces the plastic wheels from the kit. On this type it is the most laborious part of the landing gear of all: each main leg carried a bogie with eight small wheels in two rows of four, so there is a long row of wheels on the model and every plastic one would want its seam sanded down. The one-piece casting does not have it, and the underside of the tire is flattened, as if the weight of the machine were pressing on the wheel.

The real subject

The B-58 Hustler was the first supersonic strategic bomber of the United States Air Force. It had a delta wing, four engines in separate nacelles under the wing and carried its load, along with fuel, in a jettisonable pod under the fuselage. The crew of three sat in tandem in separate cockpits. It entered service in 1960. The bogies with many small wheels came out of necessity: large wheels would not have fitted into the thin wing, so only small fairings arose on its underside.

How to work with the resin wheels

Wash the parts in warm soapy water so that the mold release agent disappears. Cut the casting block off with a fine-toothed saw and sand the face down, protecting your breathing while you sand. Glue with cyanoacrylate, that is, super glue; cement for polystyrene does not hold on resin. Point the flattened part of the tire toward the base and align both sides. Spray a primer before painting.

Who the set is for

  • Builders of large models of Cold War bombers in 1:48
  • Modelers who want to avoid sanding seams on many wheels
  • Owners of older molds with coarsely shaped wheels
  • Diorama builders who build a machine standing on the ground

The set is supplied unpainted. Glue, paints and the base kit are not included in the package, unless stated otherwise.

Reviews

No reviews yet Have you built this one? Tell other modellers how it went and help them choose.

Forum

Naši poradci a znalci sortimentu jsou připraveni odpovídat na Vaše dotazy (Po–Pá, 8–18 hod).
Zeptejte se na co potřebujete, odpovíme co nejdříve.

Texts from customers in the advice section reflect solely the opinions and views of the customers. MNF trade s.r.o. does not approve or verify customer texts in advance.

There are no questions here yet. Be the first to ask!

FAQ

It is not. It is a set of replacement resin wheels for a model of the B-58 Hustler in 1:48 scale. The aircraft model itself has to be obtained separately.

Each main leg carried a bogie with eight small wheels in two rows of four. Larger wheels would not have fitted into the thin delta wing.

The lower part of the tire is cast flattened, as if the weight of the machine were pressing on the wheel. The model then does not look as if it were floating above the base.

Cyanoacrylate glue, that is, super glue. Cement for polystyrene does not hold on resin. Wash the parts before gluing and rid them of the mold release agent.

Last seen

ArmoryARAW483541:48

1:48 B-58 Hustler wheels w/ weighted tyres

Resin wheels with weighted tires for a model of the Convair B-58 Hustler bomber in 1:48 scale from the Ukrainian maker Armory. An accessory for a model, not a kit.
In stock
20.36 €
Green Stuff WorldGSW309941:48

Trident Anti Tank Obstacle 1:48-1:35

Trident Anti Tank Obstacle 1:48-1:35 is three resin anti-tank obstacles for dioramas. They are supplied unpainted and it is not a vehicle kit.
In stock
5.16 €
Royal ModelRM4541:35

1:35 T34/76 Transmission Cover (dragon)

The rear transmission cover of the T-34/76 tank in 1:35 scale as a photo-etched metal part that replaces the coarser plastic version.
In stock
13.16 €
Loading, please wait...

Setting consent to personalization

With your consent, we may use the information below for the following purposes or share it with selected partners. You can adjust your settings for individual purposes (types of processing) and confirm your choice with the "Save settings" button:

Always active

Necessary cookies

These are technical files that are necessary for the correct behavior of our website and all its functions. They are used, among other things, to store products in the shopping cart, display products on request, control filters, personal settings and also set consent to the use of cookies. Your consent is not required for these cookies and it is not possible to remove it.

Analytical cookies

They count website traffic and, by collecting anonymous statistics, enable the operator to better understand their visitors and thus constantly improve the site.

Marketing cookies

They collect information to better tailor advertising to your interests, both on and off this website.

Setting consent to personalization

To make it easier for you to browse the site, to offer you customized content or advertising, and to analyze traffic anonymously, we use cookies that we share with our partners for social media, advertising, and analytics. You can adjust their settings with the "Edit settings" link and you can change it at any time in the footer of the website. You can find more detailed information in our Policy on the protection of personal data and the use of cookies.