Přidali jsme nové modely do výprodeje za skvělé ceny! | ENG: We've added new model kits to our sale at great prices!
A polystyrene strip 0.50 x 6.3 mm. Its medium thickness combines the flexibility of a sheet with the strength of a plank, and it serves well for fences, floors and advertising boards.
Responsibility details are not available.
Between a thin film and a solid rod lies a band where the material still bends but already remembers a flat plane. Half a millimeter at a width of 6.3 mm is exactly there. The strip can be bent lightly over the edge of a cylinder, but once released it returns and then holds a straight shape in a structure without the risk of cracking during sanding.
Modelers use it for plank fences, walkways, warehouse floors, advertising boards and signs with lettering that are then printed or covered with a decal. On military equipment it becomes wooden crates and light covers, and on a railway the edges of platforms. For figure scenes it is a favorite for a shed door: two vertical pieces as the jambs, three horizontal as the boarding, and the result looks believable even without scribing the structure. It just as readily replaces a missing step or the rim of a cargo bed broken off during building.
Equal lengths are made fastest against a simple stop from an offcut glued to the mat. The knife is guided perpendicular and the material is snapped only after a deeper score, otherwise it may break off sideways. The surface takes a wood structure once scrubbed with a wire brush or stroked with coarse paper, and then a glaze of oil paint too. Two strips glued together give double the thickness with no visible seam, provided the surfaces are dusted off before joining.
Naši poradci a znalci sortimentu jsou připraveni odpovídat na Vaše dotazy (Po–Pá, 8–18 hod).
Zeptejte se na co potřebujete, odpovíme co nejdříve.
Texts from customers in the advice section reflect solely the opinions and views of the customers. MNF trade s.r.o. does not approve or verify customer texts in advance.
There are no questions here yet. Be the first to ask!