An I-profile 2.5 mm high in white styrene. A beam one step heavier for bridges, portals and roof trusses.
Responsibility details are not available.
The middle size, the one you reach for when a structure should be clear but not clumsy. A bridge railing, a portal over an entrance, a truss over a hall: a beam two and a half millimeters high sits well in all of them. The material is white polystyrene, the rod is 35 cm long and it is sold as single pieces.
Not every surface wants a light touch on the edges. Where dirt, shadow and depth are the point, the opposite tool suits: heavily thinned paint that runs into the corners and leaves the raised places alone. The difference is fundamental. Edge highlighting adds light, a glaze takes it away, and when both techniques are used at once and without thought, the result goes gray in the middle.
The rule can be put simply: rough cast iron, concrete and dusty machines want a glaze; sharp machined edges, rivets and worn metal parts want light. On a beam under a roof the glaze plays first fiddle, because all the dirt of the scene ends up exactly in its corners.
The condition is a smooth, slightly glossy surface over which the thinned paint slides. On a rough matte surface the glaze stops where it lands, and instead of a shadow a stain appears.
The leftover pieces come in useful for testing the thinning. Before you let the glaze onto the model, run it over a painted offcut and watch where it really flows.
Naši poradci a znalci sortimentu jsou připraveni odpovídat na Vaše dotazy (Po–Pá, 8–18 hod).
Zeptejte se na co potřebujete, odpovíme co nejdříve.
Texts from customers in the advice section reflect solely the opinions and views of the customers. MNF trade s.r.o. does not approve or verify customer texts in advance.
There are no questions here yet. Be the first to ask!