ThermoArt Armor Grey 375x1000 mm (L2)

What the sheet is for

Costume making stands or falls on the sheet material from which the parts of armor, pauldrons, shin guards, shields and other pieces of a prop can be cut. A sheet of this format is an advantage over small offcuts: you lay the parts out on it so that they follow on from each other and do not have to split them needlessly in visible places. The gray shade suits places where a part is to keep a metal character even without paint, or serves as a base under a further surface finish.

Dimensions and designation

The sheet measures 375 x 1000 mm, that is 37.5 x 100 cm. That corresponds to an area of 0.375 square meters, which is enough for a larger piece of armor and for a series of smaller parts from one sheet. The designation L2 is the size code of the line; sheets in other formats are sold under the same line, so when reordering, compare the dimensions rather than just the name.

How to work with it

It pays to start with a paper template. Cut the shape out of paper, try it on a mannequin or on yourself, and only then trace the proven template onto the sheet. Cut with a sharp blade run along a straightedge and change the blade rather more often, because a blunt blade tears the material. Always try the method on an offcut first. The designation of the line refers to heat working, but check the recommended temperature, the way of forming and the right adhesive in the manufacturer's instructions rather than guessing.

Storage and terms of supply

Store the sheet flat rather than rolled, and away from sources of heat. The delivery holds the material in the dimensions stated; glue, paints, buckles, straps and tools are not included, unless stated otherwise.