Brass round rods O 1.5 mm length 245 mm x 3 pcs. is a package of three brass rods 1.5 mm in diameter for model building, conversions and the replacement of small parts.
Responsibility details are not available.
This item is not a kit or a finished part but modeling material. The package contains three brass rods 1.5 mm in diameter and 245 mm long. Brass is exceptionally practical for modeling work: it is hard enough to hold its shape and can still be cut, filed, drilled and soldered with ordinary household equipment. Unlike plastic sections it does not sag under its own weight and it carries a load, so it also suits places where a part has to support something.
Cut the rod with a hacksaw or with side cutters; after cutting always true the end up with a file so that it seats square. Drill the hole for a pin with a bit of the same diameter, and preferably in two goes so that the plastic does not split. Brass can be glued with super glue, but a stronger joint that can be taken apart again is made by soldering. Before painting, degrease the surface and apply a primer for metal, otherwise the paint will not hold on the smooth surface. Brass can also be chemically blackened to a dark shade, which is useful on small parts where a coat of paint would bury the detail.
For modelers who convert kits, build their own parts or need a strong replacement for thin plastic elements. Builders of military vehicles, ships and aircraft will appreciate it regardless of scale, because it is a universal stock material.
This is a modeling material, not a kit. Use eye protection when cutting and sanding metal.
Naši poradci a znalci sortimentu jsou připraveni odpovídat na Vaše dotazy (Po–Pá, 8–18 hod).
Zeptejte se na co potřebujete, odpovíme co nejdříve.
Texts from customers in the advice section reflect solely the opinions and views of the customers. MNF trade s.r.o. does not approve or verify customer texts in advance.
There are no questions here yet. Be the first to ask!
