Building JIG 801 (210x250 mm) is a modeling building jig that holds the parts of a model at right angles while they are glued and dry. It is not a model.
Responsibility details are not available.
This is not a model or a kit, but a modeling work jig measuring 210x250 mm. It serves as a firm base with angled supports that holds the parts of a model square and symmetrical until the glue dries. It comes into its own when gluing fuselages, sides, bulkheads and whole assemblies at an exact right angle.
You will use the jig across scales and materials (plastic, resin, card). Before gluing, lay the parts out dry and check the angles; only then apply the glue and let it dry in the jig. Keep the working surface clean of glue residue.
Naši poradci a znalci sortimentu jsou připraveni odpovídat na Vaše dotazy (Po–Pá, 8–18 hod).
Zeptejte se na co potřebujete, odpovíme co nejdříve.
Texts from customers in the advice section reflect solely the opinions and views of the customers. MNF trade s.r.o. does not approve or verify customer texts in advance.
There are no questions here yet. Be the first to ask!
