A rotating display base with a display cover, 84 millimeters in diameter and 200 millimeters high. The model can be turned without your laying a hand on it.
Responsibility details are not available.
The display case closes a finished model in and screens it from dust, which settles most on horizontal surfaces and is hardest of all to get off fine parts. The base also rotates, so you turn the model without having to lay a hand on it and can show your finished work from every side. That pays off above all with pieces that have fragile elements, that is, with antennas, photo-etched parts, propellers and booms, whose life every carrying by hand shortens.
The cover measures 84 millimeters in diameter and 200 millimeters in height. The usable space inside is somewhat smaller than these outer dimensions, so reckon with that. Measure your model beforehand in all three directions, including the base it stands on; with an aircraft the span and the length decide, with a figure or a rocket the height does instead. A tall slender shape suits a cylinder with these proportions better than a sprawling model with a large footprint.
Clean the model with a soft brush before closing it in, so that dust does not stay inside with it. Set the base aside for one piece and leave a little room around it, so that the fragile parts do not touch the wall. Stand the display case out of direct sun, which gradually changes the shade of the paints. Wipe the cover only with a soft cloth, dry or slightly damp with water; solvents and alcohol-based cleaners dull clear surfaces.
Neither a model nor its base is part of the delivery, unless stated otherwise.
Naši poradci a znalci sortimentu jsou připraveni odpovídat na Vaše dotazy (Po–Pá, 8–18 hod).
Zeptejte se na co potřebujete, odpovíme co nejdříve.
Texts from customers in the advice section reflect solely the opinions and views of the customers. MNF trade s.r.o. does not approve or verify customer texts in advance.
There are no questions here yet. Be the first to ask!