The Mineshima set of 5 drill bits contains five steel modeling bits from 0.8 to 2.5 mm for drilling by hand into plastic, resin and soft metal.
Responsibility details are not available.
A practical set of five steel drill bits from the Japanese maker Mineshima in diameters of 0.8, 1.0, 1.5, 2.0 and 2.5 mm. It covers the most frequently used medium hole sizes in building models. The bits are held in a hand drill holder (a pin vise) and drilling is done sensitively by hand into plastic, resin and soft metal.
For modelers who want several of the most used diameters to hand in a single set. Hold the bits in a pin vise; that is not included in the package, unless stated otherwise.
The tips are sharp and thin bits are brittle. Drill square and without sideways pressure, back the part up and store the tools out of the reach of children.
Naši poradci a znalci sortimentu jsou připraveni odpovídat na Vaše dotazy (Po–Pá, 8–18 hod).
Zeptejte se na co potřebujete, odpovíme co nejdříve.
Texts from customers in the advice section reflect solely the opinions and views of the customers. MNF trade s.r.o. does not approve or verify customer texts in advance.
There are no questions here yet. Be the first to ask!