1:16 Floor Tiles

The product

A paved floor for dioramas in 1:16 scale. It belongs among the elements that set a scene in its surroundings at once: the regular pattern of joints keeps the view down at ground level and gives a model a firm, legible foundation. In 1:16 scale an adult figure corresponds to roughly 11 cm, so even a common tile 20 cm along the side comes out at 12.5 mm and stays apparent at first glance.

How to put the scene together

It pays to begin with the layout. Lay the paving out dry first, even the joints up along one axis and only then glue the area to a firm base, plywood or thick cardboard for instance. Cover the transition to the terrain around with a threshold, a curb or a heap of rubble, so that the edge is not visible. You can also disturb the paving on purpose: a broken corner, a missing piece or a crack lend the scene a story and break up the regularity that would otherwise come across as machine-made.

• Floor tiles for dioramas in 1:16 scale
• A regular relief of paving with joints
• A foundation for the interior of a workshop, a garage or a hall and for a paved yard
• It will bear deliberate damage: a broken corner, a crack, a missing piece
• The item is distinguished by the code ETA830

Building and painting tips

Cut the excess material away with a sharp blade a little distance from the part and sand the rest level. Wash and degrease the area before painting. Apply the paint from the whole to the detail: a continuous base, then a dark wash into the joints and finally a dry brush on the edges. Go over several tiles a tone differently, so that the area does not come across as uniform. Choose the glue according to the material of the parts; the specific procedure is given in the maker's instructions.

Who it is for

For builders of dioramas in 1:16 scale and for anyone looking for firm ground under their figures and equipment. Paints and glue are not included in the package, unless stated otherwise.