The outboard AERO-3B pylon for the AIM-9B missile for the F-105 Thunderchief in 1:32 scale is a resin 3D printed accessory by Reskit for a finished aircraft model.
Responsibility details are not available.
This set by Reskit holds the outboard wing pylon with the AERO-3B launch rail, on which the AIM-9B Sidewinder missile was hung on the F-105 Thunderchief. It is a resin 3D printed accessory that is fitted onto a finished aircraft model. Printing handles the thin profiles of the rail and the small details of the attachment better than injection-molded plastic, so the store looks slender and faithful on a model.
The Republic F-105 Thunderchief was a single-engined supersonic fighter-bomber of American manufacture, deployed above all in Southeast Asia. Besides its main strike armament on the centerline and inboard stations, it carried air-to-air missiles on the outboard pylons for its own defense. AERO-3B is the designation of the launch rail for the early versions of the Sidewinder, among which the AIM-9B belongs.
Wash the part in lukewarm water with detergent so that the remains of print resin come off. Cut the print supports away with a fine saw or a sharp knife as close to the part as possible and level the mark with a file; hold the thin parts of the rail as you work so that they do not break off. It is glued with cyanoacrylate glue, dosed with a pin on small parts. Apply a primer before painting and paint the pylon separately from the wing, as you then reach its sides more easily.
Naši poradci a znalci sortimentu jsou připraveni odpovídat na Vaše dotazy (Po–Pá, 8–18 hod).
Zeptejte se na co potřebujete, odpovíme co nejdříve.
Texts from customers in the advice section reflect solely the opinions and views of the customers. MNF trade s.r.o. does not approve or verify customer texts in advance.
There are no questions here yet. Be the first to ask!
