1:32 Focke Wulf Ta 152 H0/H1 Airbrush paint mask

Marking masks for the Focke-Wulf Ta 152 H0/H1 (1:32, 1 Man Army)

A set of highly accurate painting (airbrush) masks in 1:32 scale from the manufacturer 1 Man Army, intended for a model of the German high-altitude fighter Focke-Wulf Ta 152 H-0/H-1. It is neither a model nor decals but self-adhesive masks with which you spray the basic markings and the small maintenance lettering (stencils) directly in paint. The result is a faithful sprayed-on look without a carrier film. The set is arranged for the large Ta 152 H model in 1:32 scale. The exact kit it is intended for is not stated here.

Use

• Spraying the basic markings and the stencils on a Ta 152 H model
• An alternative to decals with no carrier film and therefore no silvering
• For the large 1:32 scale, where the sharpness of the edges tells
• Transfer tape and spare masks for practice are usually included

Usage tips

The surface of the model must be smooth, clean and degreased. Transfer the masks with the transfer tape, press the edges down thoroughly and spray in thin coats so that the paint does not run. Let the paint set and take the mask off in time. Practice the technique on the spare masks.

Who the set is for

For modelers who want maximally faithful and sharp markings on a large Ta 152 H without the film of decals. The model, paints and an airbrush are not included in this set.

This is a modeling accessory (painting masks), not a model and not decals. To use it you need the matching model and an airbrush.