29.–30. 10. z technických důvodů zavřeno. / Closed 29–30 October for technical reasons.

1:48 AGM-114A/B Hellfire missile (4 pcs)

Reskit 1:48 AGM-114A/B Hellfire is a set of four resin guided missiles of the early versions for helicopter models in 1:48 scale.

Scale1:48
Manufacturer Reskit
Product EAN7681111037514

Responsibility details are not available.

6.36 €
5.26 € without VAT
In stock
Free shipping on orders over 1,000 czk in czech republic Personal pickup in Prostějov 14-day returns

About product

Resin AGM-114A/B guided missiles in 1:48 scale

Four missiles as an accessory for the launch rails, not a model of a machine. At this scale a missile is a shape on which everything that does not suit plastic comes together: a long smooth body with a seam along its whole length, thin fins and control surfaces, a nose with the optics of the seeker. A resin casting carries the body in one piece, so you do not have to sand a seam along the whole length and keep the small rings and transitions on the casing at the same time. That is exactly where detail is most often lost on missiles from the box.

The real subject

The AGM-114 Hellfire is an anti-armor guided missile with semi-active laser guidance, used above all from the stub wings of helicopters. The A and B versions belong to the early forms of the family, so the set suits machines in earlier configurations. The missile is hung on launch rails in two-rail and four-rail forms.

What to expect during fitting

The main work is in preparing the surface. The casting block tends to be at the tail or along the body; cut it off with a fine-toothed saw and level the face with progressively finer grits wet, with respiratory protection. Then wash the body and lay down a primer, which on a smooth surface shows at once where you have not finished sanding. Spray the paint on, as brush strokes would stand out on a cylindrical body. Fit the missiles to the rails only once both parts have been painted separately, since you cannot get between them once assembled. They are bonded with super glue, and for hanging them a very short wire pin pays off.

Who the set is for

  • Builders of attack helicopters in 1:48 scale.
  • Modelers building machines with early-version armament.
  • More experienced builders who want a clean surface without a seam.

Hellfire missile sets come in several versions by missile variant and scale, told apart by the exact designation. Compare it with the configuration of the machine you are building.

The set is an accessory for a model, not a standalone kit. The launch rails and the model are not included in the package, unless stated otherwise.

Reviews

No reviews yet Have you built this one? Tell other modellers how it went and help them choose.

Forum

Naši poradci a znalci sortimentu jsou připraveni odpovídat na Vaše dotazy (Po–Pá, 8–18 hod).
Zeptejte se na co potřebujete, odpovíme co nejdříve.

Texts from customers in the advice section reflect solely the opinions and views of the customers. MNF trade s.r.o. does not approve or verify customer texts in advance.

There are no questions here yet. Be the first to ask!

FAQ

By the name, four pieces.

The manufacturer carries rails for Hellfire missiles as separate sets.

They are the early form of the Hellfire family. The set therefore suits machines in earlier armament configurations.

Once the casting block is cut off, sand wet with progressively finer grits, wash the part and lay down a primer. That shows any spots left unsanded before painting.

Last seen

ReskitRS48-03261:48

1:48 AGM-114A/B Hellfire missile (4 pcs)

Reskit 1:48 AGM-114A/B Hellfire is a set of four resin guided missiles of the early versions for helicopter models in 1:48 scale.
In stock
6.36 €
TamiyaTA780281:350

1:350 New Jersey BB-62

A plastic kit of the American battleship USS New Jersey (BB-62) in 1:350 scale from the manufacturer Tamiya. A large Iowa class ship model with photo-etched accessories.
In stock
100.76 €
AiresAIR70391:72

1:72 P-47D Thunderbolt detail set

The Aires P-47D Thunderbolt detail set 1:72 is a resin detail set for experienced modelers that raises the level of detail of a kit. It is not an airplane model but an accessory.
In stock
29.60 €
Aires/AerobonusAER3200211:32

1:32 Fire drums and buckets

The fire barrels and buckets in 1:32 scale are a resin accessory of airfield ground support equipment for dioramas. It is not a model but equipment for a scene.
In stock
6 €
RESArmRA48-030121:48

1:48 Wheels for HURRICANE var. 2 (under load)

RESArm 1:48 wheels under load for the Hurricane (var. 2) is a resin (3D printed) set of landing gear wheels with a realistic deflection of the tire under the weight of the machine.
In stock
6.36 €
MASTERAM721081:72

1:72 Su-25 (Frogfoot) - Pitot Tubes

The turned metal (brass) MASTER pitot tubes for the Su-25 (Frogfoot) 1:72 : a precise replacement for the plastic parts for a realistic nose on the attack aircraft.
In stock
8.76 €
Green Stuff WorldGSW4473

50x Droppers with Suction Bulb

Plastic droppers with a suction bulb, 50 pieces from Green Stuff World: disposable pipettes for measuring out paint and thinner.
In stock
5.96 €
Loading, please wait...

Setting consent to personalization

With your consent, we may use the information below for the following purposes or share it with selected partners. You can adjust your settings for individual purposes (types of processing) and confirm your choice with the "Save settings" button:

Always active

Necessary cookies

These are technical files that are necessary for the correct behavior of our website and all its functions. They are used, among other things, to store products in the shopping cart, display products on request, control filters, personal settings and also set consent to the use of cookies. Your consent is not required for these cookies and it is not possible to remove it.

Analytical cookies

They count website traffic and, by collecting anonymous statistics, enable the operator to better understand their visitors and thus constantly improve the site.

Marketing cookies

They collect information to better tailor advertising to your interests, both on and off this website.

Setting consent to personalization

To make it easier for you to browse the site, to offer you customized content or advertising, and to analyze traffic anonymously, we use cookies that we share with our partners for social media, advertising, and analytics. You can adjust their settings with the "Edit settings" link and you can change it at any time in the footer of the website. You can find more detailed information in our Policy on the protection of personal data and the use of cookies.