1:48 F-4 E 2020 Terminator - 3D-Printed & Coloured Interior Small Version (for Meng Kits)

1:48 F-4 E 2020 Terminator - 3D-Printed & Coloured Interior Small Version (for Meng Kits)

26.36 €
Add to Cart

1:48 F-4 E 2020 Terminator - 3D-Printed & Coloured Interior Small Version (for Meng Kits)

The colored interior of the cockpits of the F-4E 2020 Terminator in 1:48 scale, the smaller variant of the set with a narrower selection of elements. Made for the Meng kits.

Scale1:48
Manufacturer Quinta Studio
Product EAN9991117360576

Responsibility details are not available.

26.36 €
21.79 € without VAT
In stock
Free shipping on orders over 1,000 czk in czech republic Personal pickup in Prostějov 14-day returns

About product

The real subject

F-4E 2020 Terminator is the designation of the upgraded Phantoms of the Turkish Air Force. The airframes come from the F-4E version, that is a two-seat twin-engine combat aircraft with jet engines and a tandem cockpit, but the upgrade reached the equipment including the cockpit, so the inside of both stations differs from the original machines. A large part of it is visible under the open canopies, and it is useful to have this detail settled during the build.

What the set contains

The set brings colored interior elements printed on a 3D printer and carried on a backing film. The instrument panels, the side consoles and other parts of the cockpit have real relief and are already painted complete with stencils, so painting the small dials falls away. It is the smaller variant of the set: it holds a narrower selection of elements than the full version and concentrates on what is most visible in the cockpit. The shaping matches the F-4E kits in 1:48 scale from Meng.

Building and painting tips

The elements go onto surfaces finished before the fuselage is closed, so bring the set in right at the start of the build. Paint the surface under the element in the base cockpit shade, clean it and degrease it. The molded relief of the instruments on the plastic is best sanded flat so that the element beds down. The procedure for applying them is described in the instructions supplied by the manufacturer; follow it. Once both stations are finished, check dry that the canopies close and that nothing is in the way. Dip the sheet briefly in lukewarm water, slide the element off the backing paper onto gloss varnish, which is what holds it, and do not use a decal softener.

Who it is for

The set suits modelers who want a legible interior in both cockpits without painting the small instruments, and also those looking for a quicker route than the full variant. The package holds only the sheet with the interior elements. The kit, paints and glue are not part of the delivery, unless stated otherwise.

Reviews

No reviews yet Have you built this one? Tell other modellers how it went and help them choose.

Forum

Naši poradci a znalci sortimentu jsou připraveni odpovídat na Vaše dotazy (Po–Pá, 8–18 hod).
Zeptejte se na co potřebujete, odpovíme co nejdříve.

Texts from customers in the advice section reflect solely the opinions and views of the customers. MNF trade s.r.o. does not approve or verify customer texts in advance.

There are no questions here yet. Be the first to ask!

FAQ

It holds a narrower selection of elements and concentrates on the most visible parts of the cockpit. The full set covers the interior in more depth.

According to the manufacturer, F-4E models in 1:48 scale from Meng.

The sheet is dipped briefly in lukewarm water and the element is slid off the backing paper onto gloss varnish. Always clean and degrease the surface under the element.

The molded relief of the instruments is best sanded flat so that the element beds down over its whole surface.

It is not. Only the sheet with the interior elements is supplied; the kit and the paints have to be obtained separately.

Last seen

Quinta StudioQDS483501:48

1:48 F-4 E 2020 Terminator - 3D-Printed & Coloured Interior Small Version (for Meng Kits)

The colored interior of the cockpits of the F-4E 2020 Terminator in 1:48 scale, the smaller variant of the set with a narrower selection of elements. Made for the Meng kits.
In stock
26.36 €
1:35 Merkava Mk.3D/Baz tactical markings-25 %Stock ClearanceFavorite
MengSPS-0031:35

1:35 Merkava Mk.3D/Baz tactical markings

The decal set Merkava Mk.3D/Baz tactical markings with the tactical and identification markings of the Israeli Merkava Mk.3D/Baz main battle tank in 1:35 scale.
7 leftof 8
9.96 €7.48 € You save 2.48 €
HatakaHTK-CS21

Early WW2 French Army paint set

Eight lacquer paints for French armored vehicles from the First World War to the prewar camouflage schemes of 1938.
In stock
21.16 €
ValomVAL721561:72

1:72 DH.95 Flamingo Civil Users

1:72 DH.95 Flamingo Civil Users is a plastic kit of the British twin-engine airliner de Havilland DH.95 in the markings of civil operators from the Czech maker Valom.
In stock
27.96 €
AMMO of Mig JimenezA.MIG-8245

SOFTOUCH VELVET Masking Sheet 1mmGrid 290x145

A masking sheet 290 x 145 mm with a grid of one millimeter. It is used for cutting your own masks to fit a model.
In stock
7.96 €
GunzeC374

C374 JASDF Shalow Ocean Blue (Semi-Gloss)

A semi-gloss modeling paint Mr.Color with the designation C374, the blue shade Shallow Ocean Blue for aircraft of the Japan Air Self-Defense Force.
In stock
3.20 €
Loading, please wait...

Setting consent to personalization

With your consent, we may use the information below for the following purposes or share it with selected partners. You can adjust your settings for individual purposes (types of processing) and confirm your choice with the "Save settings" button:

Always active

Necessary cookies

These are technical files that are necessary for the correct behavior of our website and all its functions. They are used, among other things, to store products in the shopping cart, display products on request, control filters, personal settings and also set consent to the use of cookies. Your consent is not required for these cookies and it is not possible to remove it.

Analytical cookies

They count website traffic and, by collecting anonymous statistics, enable the operator to better understand their visitors and thus constantly improve the site.

Marketing cookies

They collect information to better tailor advertising to your interests, both on and off this website.

Setting consent to personalization

To make it easier for you to browse the site, to offer you customized content or advertising, and to analyze traffic anonymously, we use cookies that we share with our partners for social media, advertising, and analytics. You can adjust their settings with the "Edit settings" link and you can change it at any time in the footer of the website. You can find more detailed information in our Policy on the protection of personal data and the use of cookies.