1:48 Mi-24V NATO (black panels) 3D-Printed & coloured Interior

1:48 Mi-24V NATO (black panels) 3D-Printed & coloured Interior

29.96 €
Add to Cart

1:48 Mi-24V NATO (black panels) 3D-Printed & coloured Interior

Color three-dimensional printed interior elements for the Mi-24V attack helicopter in the black panel version, 1:48 scale. The elements are dipped briefly in water.

Scale1:48
Manufacturer Quinta Studio
Product EAN8591111000000

Responsibility details are not available.

29.96 €
24.76 € without VAT
In stock
Free shipping on orders over 1,000 czk in czech republic Personal pickup in Prostějov 14-day returns

About product

The real subject

The Mi-24 is an attack helicopter with stub wings and a crew seated in two cockpits one behind the other, with the rear pilot's station higher than the front one. Behind the cockpits there is a cabin for a carried squad, which makes this machine a combination of a gunship and a transport helicopter. This set is aimed at the Mi-24V version in the black instrument panel form.

What the set contains

Color three-dimensional printed interior elements in 1:48 scale. The panels, the instruments and their labels are in color from the factory, so painting individual dials and then drybrushing the bezels falls away. The relief of the print tells above all on the instrument panels of both stations, where a flat decal from the box adds no depth. The extent of the parts is given in the manufacturer's instructions. The thin film does not increase the thickness of the part, so it does not get in the way when closing the covers.

How the elements are applied

The QD range is applied the wet way. Cut the element from the sheet, put it for about fifteen seconds in lukewarm water and slide it off the backing paper into place. It has no adhesive layer of its own, so spray the surfaces beneath the elements and cover them with a gloss varnish such as Future or Tamiya X-22. Bring the part to its place, blot the excess water and press it down with a soft tool so that it seats into the recesses of the panel too; in a deep recess a drop of cyanoacrylate glue helps. Do not use a decal softener or a decal fixer.

Who it is for

The set pays off on a model built with the doors open or the cockpit covers slid back, where the interior is visible. Check what kit it is intended for in the manufacturer's instructions. The helicopter, paints and glue are not included in the package, unless stated otherwise.

Reviews

No reviews yet Have you built this one? Tell other modellers how it went and help them choose.

Forum

Naši poradci a znalci sortimentu jsou připraveni odpovídat na Vaše dotazy (Po–Pá, 8–18 hod).
Zeptejte se na co potřebujete, odpovíme co nejdříve.

Texts from customers in the advice section reflect solely the opinions and views of the customers. MNF trade s.r.o. does not approve or verify customer texts in advance.

There are no questions here yet. Be the first to ask!

FAQ

Yes, briefly. About fifteen seconds in lukewarm water, then the element slides off the backing paper into place. No decal softener is used.

The instrument panels in the set are done in a dark shade. It is a color variant of the interior that is worth comparing with the references for the machine you are modeling.

In the deeper recesses of the panels. Press the film there carefully with a soft tool after laying it down, so that it is not left lifted anywhere.

It is not. The set is an accessory to a separately sold kit in 1:48 scale.

Last seen

Quinta StudioQD480361:48

1:48 Mi-24V NATO (black panels) 3D-Printed & coloured Interior

Color three-dimensional printed interior elements for the Mi-24V attack helicopter in the black panel version, 1:48 scale. The elements are dipped briefly in water.
In stock
29.96 €
PeewitPWM720671:72

1:72 L-29 Delfin - pro modely AvantGarde (AMK)

Peewit — die-cut painting masks for the L-29 Delfin, 1:72 scale are a self-adhesive masking set for plastic models, not a model. The target kit is the AMK one.
In stock
3.16 €
OmaskOMK748161:48

1:48 P-47 Thunderbolt wheel bay plugs (for Tamiya)

Omask Landing Gear Bay Plugs for the P-47 Thunderbolt (1:48) are shaped plugs that fit into the landing gear bays of a 1:48 P-47 model (Tamiya kit) and protect them during spraying. This is an accessory, not a model.
In stock
3.20 €
SBS ModelSBS480091:48

1:48 Macchi Mc-202 - 205 seats without harness (x2)

A pair of seats for models of the Italian Macchi C.202 and C.205 fighters in 1:48 scale. The seats come without belts, so you add the harness as you see fit.
In stock
6.76 €
Royal ModelRM5021:35

1:35 Pz.Kpfw. I Ausf.B (dragon)

In stock
31.16 €
ReskitRS72-03491:72

1:72 Messerschmitt Bf-109F (G Early) wheels set Type 1 (weighted)

Reskit Bf 109F (G early) wheels Type 1 (weighted), 1:72 is a resin replacement wheel set for models of the Messerschmitt Bf 109F and early G. It is a detail accessory, not an aircraft kit.
In stock
5.96 €
Loading, please wait...

Setting consent to personalization

With your consent, we may use the information below for the following purposes or share it with selected partners. You can adjust your settings for individual purposes (types of processing) and confirm your choice with the "Save settings" button:

Always active

Necessary cookies

These are technical files that are necessary for the correct behavior of our website and all its functions. They are used, among other things, to store products in the shopping cart, display products on request, control filters, personal settings and also set consent to the use of cookies. Your consent is not required for these cookies and it is not possible to remove it.

Analytical cookies

They count website traffic and, by collecting anonymous statistics, enable the operator to better understand their visitors and thus constantly improve the site.

Marketing cookies

They collect information to better tailor advertising to your interests, both on and off this website.

Setting consent to personalization

To make it easier for you to browse the site, to offer you customized content or advertising, and to analyze traffic anonymously, we use cookies that we share with our partners for social media, advertising, and analytics. You can adjust their settings with the "Edit settings" link and you can change it at any time in the footer of the website. You can find more detailed information in our Policy on the protection of personal data and the use of cookies.