Přidali jsme nové modely do výprodeje za skvělé ceny! | ENG: We've added new model kits to our sale at great prices!

1:48 WWII German Tiger I Early Production Upgrade Set (Tamiya 32603 32504)

1:48 WWII German Tiger I Early Production Upgrade Set (Tamiya 32603 32504)

18.76 €
Add to Cart

1:48 WWII German Tiger I Early Production Upgrade Set (Tamiya 32603 32504)

A photo-etched set for a model of the early production Tiger I in 1:48 scale from Voyager Model adds thin metal fenders, grilles and brackets to a kit, which cannot be made from plastic. Target kit: Tamiya 32603 32504.

Scale1:48
Manufacturer Voyager Model
Product EAN9991117364142

Responsibility details are not available.

18.76 €
15.50 € without VAT
In stock
Free shipping on orders over 1,000 czk in czech republic Personal pickup in Prostějov 14-day returns

About product

Tiger I early production 1:48 - Voyager Model photo-etched upgrade set

This is not a vehicle kit but an add-on photo-etched set. It serves to raise the detail of a plastic model of the German Tiger I heavy tank in its early production form, 1:48 scale. The etched parts replace plastic pieces that in this scale are necessarily thicker than reality allows, and they add fine elements an injection mold cannot capture. The maker is Voyager Model, a brand focused on metal accessories for military vehicle models. The set is meant for the Tamiya 32603 32504 kit.

The real subject

The Tiger I, in full the Panzerkampfwagen VI Tiger Ausf. E, was a German heavy tank of the Second World War armed with an 88 mm gun. During production it went through a number of changes, so early, mid and late production series are distinguished. The early machines differ from later ones in, among other things, the form of the commander's cupola, the layout of the exhausts and the fittings on the hull, the engine compartment ventilation system and the details of the fenders. It is precisely these small things that tend to be simplified on a plastic model.

Building tips

Separate the parts with a scalpel on a hard surface and make the bends in a bending tool or over a metal ruler. Glue the metal with super glue; on larger areas a gel version with a longer setting time helps. Degrease the metal before painting and coat it with a primer. Assemble and paint the running gear before closing the hull up - on a Tiger with its interleaved road wheels you cannot reach the inner rows later. Build the weathering up gradually: a wash into the recesses, then dust pigments on the underside and the fenders.

Who the set is for

  • Builders of Tiger I models in 1:48 scale
  • Modelers who want a more accurate rendering of the early production series
  • More experienced builders with experience of etched parts
  • Those preparing the vehicle for a diorama seen at close range

This is an accessory, not a kit. The base Tamiya kit, paints and glue are not included in the package, unless stated otherwise. Check that it matches your kit before buying.

Reviews

No reviews yet Have you built this one? Tell other modellers how it went and help them choose.

Forum

Naši poradci a znalci sortimentu jsou připraveni odpovídat na Vaše dotazy (Po–Pá, 8–18 hod).
Zeptejte se na co potřebujete, odpovíme co nejdříve.

Texts from customers in the advice section reflect solely the opinions and views of the customers. MNF trade s.r.o. does not approve or verify customer texts in advance.

There are no questions here yet. Be the first to ask!

FAQ

No. These are etched parts for raising the detail; the plastic kit has to be bought separately.

The early machines had a different form of the commander's cupola, the exhausts, the fittings on the hull and the fenders. The set is drawn for exactly that form.

A sharp scalpel, a hard surface, a bending tool or a metal ruler, tweezers and super glue. A primer for metal also comes in handy.

Not necessarily. This etched set is drawn to the Tamiya kit, so check that it matches before buying.

Last seen

Voyager ModelVPE480431:48

1:48 WWII German Tiger I Early Production Upgrade Set (Tamiya 32603 32504)

A photo-etched set for a model of the early production Tiger I in 1:48 scale from Voyager Model adds thin metal fenders, grilles and brackets to a kit, which cannot be made from plastic. Target kit: Tamiya 32603 32504.
In stock
18.76 €
ReskitRS32-05841:32

1:32 LAU-3A Hydra rocket launchers for US Army & Navy (a/c & h) (2 pcs)

LAU-3A Hydra rocket pods is a resin 3D-printed set of two nineteen-tube rocket pods in 1:32 scale for adding armament to models of aircraft and helicopters.
In stock
15.96 €
ReskitRS35-00451:35

1:35 LAU-3A Hydra rocket launchers for US Army & Navy (a/c & h) (2pcs)

Reskit 1:35 - LAU-3A Hydra rocket pods for the US Army and Navy (2 pcs) is a 3D-printed detail accessory, not a kit . It is a Western (American) rocket pod with 19 tubes for unguided rockets of 2.75 inch (70 mm) caliber.
In stock
14.76 €
ReskitRS48-05841:48

1:48 LAU-3A Hydra rocket launchers for US Army & Navy (a/c & h) (2pcs)

LAU-3A Hydra rocket launcher pods are a 3D-printed (resin) detail set in 1:48 scale from Reskit. They are launch pods for unguided rockets for the US Army rather than a model of an aircraft.
In stock
12.76 €
ReskitRS72-05841:72

1:72 LAU-3A Hydra rocket launchers for US Army & Navy (a/c & h) (2pcs)

LAU-3A Hydra rocket launchers in 1:72 scale from Reskit are two resin (3D-printed) underwing rocket pods for the US Army and Navy. It is not a model.
In stock
9.16 €
ReskitRSU35-00531:35

1:35 CH-54A (S-64E) Tarhe cockpit (Detailed edition) for ICM kit

Detailed resin accessory, the CH-54A (S-64E) Tarhe cockpit, Detailed edition 1:35 from Reskit. It is not a helicopter model but an upgrade cockpit for the ICM CH-54 kit.
In stock
125.56 €
ReskitRSU35-00051:35

1:35 CH-54A (S-64E) Tarhe pilots seats for ICM kit (3 pcs)

A resin (3D-printed) set of CH-54A Tarhe pilot seats in 1:35 scale from Reskit: add-on seats for the cabin of the ICM model. It is not a helicopter model.
In stock
14.36 €
Quinta StudioQD351651:35

1:35 HH-60 H Rescue Hawk - 3D-Printed & Coloured Interior (for Kitty Hawk Kits)

Quinta Studio 1:35 HH-60 H Rescue Hawk - 3D printed color interior is an aftermarket set of color 3D decals for a detailed cockpit and cabin of the helicopter in 1:35 scale.
In stock
35.56 €
ReskitRS35-00141:35

1:35 S-24 missiles with APU-68 (4 pcs) (Mi-24)

S-24 rockets with the APU-68 launcher (4 pieces) in 1:35 scale by Reskit – 3D-printed resin large-caliber unguided rockets suitable for a model of the Mi-24 helicopter.
In stock
21.16 €
ReskitRSU35-00941:35

1:35 MH-60S unfolded main rotor for Kitty Hawk / Zimimodel

The unfolded main rotor of the MH-60S is a 3D-printed (resin) detail set in 1:35 scale by Reskit for the Kitty Hawk kits. The rotor is in the ordinary spread (flight) position; it is not a model of the helicopter.
In stock
45.16 €
Loading, please wait...

Setting consent to personalization

With your consent, we may use the information below for the following purposes or share it with selected partners. You can adjust your settings for individual purposes (types of processing) and confirm your choice with the "Save settings" button:

Always active

Necessary cookies

These are technical files that are necessary for the correct behavior of our website and all its functions. They are used, among other things, to store products in the shopping cart, display products on request, control filters, personal settings and also set consent to the use of cookies. Your consent is not required for these cookies and it is not possible to remove it.

Analytical cookies

They count website traffic and, by collecting anonymous statistics, enable the operator to better understand their visitors and thus constantly improve the site.

Marketing cookies

They collect information to better tailor advertising to your interests, both on and off this website.

Setting consent to personalization

To make it easier for you to browse the site, to offer you customized content or advertising, and to analyze traffic anonymously, we use cookies that we share with our partners for social media, advertising, and analytics. You can adjust their settings with the "Edit settings" link and you can change it at any time in the footer of the website. You can find more detailed information in our Policy on the protection of personal data and the use of cookies.