Víkendové slevy -20 %! | Weekend Sale – 20% OFF! | MASTER • KELIK • RESKIT • QUINTA STUDIO • EDUARD • GUNZE • VALLEJO

1:72 Bf 109 K masks for crosses

Omask 1:72 Bf 109 K - masks for the national insignia is a set of precisely cut self-adhesive templates for spraying the crosses on a Messerschmitt Bf 109 K model. It is not a kit but an accessory for painting a model.

Scale1:72
Manufacturer Omask
Product EAN8591111482721

Responsibility details are not available.

6.36 €
5.26 € without VAT
Out of stock – can be reserved
Free shipping on orders over 1,000 czk in czech republic Personal pickup in Prostějov 14-day returns

About product

Bf 109 K - masks for the national insignia, 1:72 (Omask)

A set of precisely cut self-adhesive masks for spraying the national insignia (the crosses) on a Messerschmitt Bf 109 K model in 1:72 scale. It is not a kit; it is an accessory used while painting a model you have already built. It is made by the Czech brand Omask, which lists this item in its range of masks for markings and codes.

Why a sprayed marking instead of a decal

Crosses are usually done with a decal. A decal, however, has a carrier film: seen from the side it shows as a rim around the marking, and on a matte surface silvering easily appears, as air stays under the film and the marking turns gray. On a broken-up surface with rivets and panel lines a decal may also fail to settle perfectly. A sprayed marking is painted straight onto the model: it has no film, no rim and no way to silver. It looks exactly as it does on a real aircraft, because there too the marking was made by spraying through a stencil. And above all: a sprayed marking can be weathered in full, chipped, faded, partly oversprayed with camouflage. A decal cannot manage that as convincingly. That is the whole point of the product: it is a step from a built model to a piece that will stand up at a competition.

How to use the mask

Apply it to a clean and degreased part; on a greasy or dusty surface the mask will not hold and the paint will creep under. Spraying goes in layers: first the light color of the marking, then the mask, then the dark surrounding shade (or the other way round according to the scheme). Take the mask off while the paint is fresh; from a fully cured layer it can pull off more than it should. Do not pull the mask over the edge of a part, and count on it being cut for a particular model; it may not fit a kit from another manufacturer or of another size.

Who the set is for

  • modelers who dislike the film rim and the silvering of decals on matte clear
  • builders of the Bf 109 K in 1:72 who aim at competition level
  • everyone who weathers markings, chipping them, fading them, overspraying them with camouflage
  • modelers working with an airbrush and with masking techniques

The set contains masks only. The model, paints and glue are not included in the package.

Reviews

No reviews yet Have you built this one? Tell other modellers how it went and help them choose.

Forum

Naši poradci a znalci sortimentu jsou připraveni odpovídat na Vaše dotazy (Po–Pá, 8–18 hod).
Zeptejte se na co potřebujete, odpovíme co nejdříve.

Texts from customers in the advice section reflect solely the opinions and views of the customers. MNF trade s.r.o. does not approve or verify customer texts in advance.

There are no questions here yet. Be the first to ask!

FAQ

It is not. It is a set of masks, an accessory for spraying the national insignia on a model you already have built. The model, paints and glue are not in the package.

A decal has a carrier film that shows from the side as a rim and often silvers on a matte surface. A sprayed marking is painted straight onto the model, with no film and no rim, and it can convincingly be chipped, faded or oversprayed with camouflage.

While the paint is fresh. From fully cured paint a mask can pull the layer under it off as it comes away. The part has to be clean and degreased before the mask goes on, and the mask must not be pulled over an edge.

Masks are cut for a particular model and scale. They may not fit another kit or another scale, so please check which kit you are building before buying.

Last seen

BrengunBRS720241:72

1:72 SA 318C Alouette II

SA 318C Alouette II 1:72 is a multimedia kit of the light French helicopter from Brengun.
In stock
31.96 €
Dead DesignNM480041:48

1:48 Jaguar GR.1/GR.3 canopy frame paint mask Kitty Hawk

1:48 Jaguar GR.1/GR.3, cockpit frame mask cut for the canopy of the Kitty Hawk kit, for slender and precise lines of framing.
In stock
7.16 €
ItaleriIT39671:24

1:24 Volvo FH Low Roof

A plastic kit, Italeri Volvo FH Low Roof , in 1:24 scale — a modern long-haul tractor unit with a low cab, a detailed engine and photo-etched parts.
In stock
62.76 €
Aires/QuickboostQB724411:72

1:72 F-14D Tomcat front undercarriage covers

Quickboost - resin nose landing gear doors for the F-14D Tomcat in 1:72 scale. An accessory that sharpens the nose landing gear of the American carrier-based fighter.
In stock
4.76 €
Green Stuff WorldGSW5726

SPRAY Chameleon PSYCHOTIC ILLUSIONS 400ml

Green Stuff World Spray Chameleon Psychotic Illusions is an effect spray from the Chameleon range, on which the perceived shade shifts with the angle of view and the lighting. It is sprayed straight from the pressurized can.
In stock
16.76 €
AiresAIR21291:32

1:32 F-16I Sufa wheel bays

F-16I Sufa landing gear bays 1:32 is an aftermarket set of cast resin parts for faithful landing gear bays on the Israeli fighter. It is not a model but an accessory for an injection-molded kit in 1:32 scale (for the Academy kit).
In stock
29.60 €
PolákPOL5972

Luční květy - Modré 14x18 cm

Meadow flowers Blue 14x18 cm from Polak is a ready-made scenic carpet of flowering meadow for building dioramas and railroad layouts.
In stock
5.96 €
1:35 Jagdpanther Ausf.G2 schurzen-25 %Stock ClearanceFavorite
EduardED364171:35

1:35 Jagdpanther Ausf.G2 schurzen

The Eduard 1:35 Jagdpanther Ausf.G2 Schürzen is a photo-etched set of Schürzen side plates in 1:35 scale. It is not a kit of the vehicle but an accessory that replaces thick plastic parts with sheet of scale thickness.
2 leftof 4
20.80 €15.60 € You save 5.20 €
Loading, please wait...

Setting consent to personalization

With your consent, we may use the information below for the following purposes or share it with selected partners. You can adjust your settings for individual purposes (types of processing) and confirm your choice with the "Save settings" button:

Always active

Necessary cookies

These are technical files that are necessary for the correct behavior of our website and all its functions. They are used, among other things, to store products in the shopping cart, display products on request, control filters, personal settings and also set consent to the use of cookies. Your consent is not required for these cookies and it is not possible to remove it.

Analytical cookies

They count website traffic and, by collecting anonymous statistics, enable the operator to better understand their visitors and thus constantly improve the site.

Marketing cookies

They collect information to better tailor advertising to your interests, both on and off this website.

Setting consent to personalization

To make it easier for you to browse the site, to offer you customized content or advertising, and to analyze traffic anonymously, we use cookies that we share with our partners for social media, advertising, and analytics. You can adjust their settings with the "Edit settings" link and you can change it at any time in the footer of the website. You can find more detailed information in our Policy on the protection of personal data and the use of cookies.