1:72 Pz.Kpfw. VI Ausf. E Tiger I, fenders is a photo-etched metal set from the Polish brand Aber that replaces the plastic fenders of a model of the German heavy tank.
Responsibility details are not available.
The set holds photo-etched metal parts intended to replace the plastic fenders on a model of the German heavy tank Pz.Kpfw. VI Ausf. E, known as the Tiger I. Aber is a Polish brand with a long tradition in photo-etched accessories, and this item belongs to its range for the small 1:72 scale.
For production reasons, plastic fenders have a thickness that in reality corresponds to several centimeters of sheet metal. In a small scale that disproportion is especially noticeable, because the fender is visible both in profile and from above. Photo-etched metal has a thickness comparable to paper and looks natural. On top of that it can be shaped: a front lip bent upward, a missing piece or a buckled panel look entirely believable on a Tiger, because on vehicles in action the fenders were among the first casualties of terrain and hits.
Cut the parts off the fret with sharp photo-etch scissors or cut them on a hard surface; never break them out. Bend them over a straight edge, ideally in a bender, and make the joints with cyanoacrylate glue applied with a pin. Before painting, degrease the metal with alcohol and use a primer so that the paint holds. Form any deformation while the part is still loose, before gluing it on.
The tank model itself is not included; the set has to be added to a kit of your own.
Naši poradci a znalci sortimentu jsou připraveni odpovídat na Vaše dotazy (Po–Pá, 8–18 hod).
Zeptejte se na co potřebujete, odpovíme co nejdříve.
Texts from customers in the advice section reflect solely the opinions and views of the customers. MNF trade s.r.o. does not approve or verify customer texts in advance.
There are no questions here yet. Be the first to ask!
