The ODAB-500P aerial bomb in 1:48 scale is a 3D-printed resin accessory from Temp Models. It is a volumetric-detonation bomb.
Responsibility details are not available.
A resin ODAB-500P aerial bomb in 1:48 scale from the Russian brand Temp Models. Printing in resin renders the shape of the body, the suspension lugs and the tail section in one piece. It is not an aircraft model but a separate piece of armament to hang on the pylon or the rack of a finished model.
ODAB is the designation for volumetric-detonation bombs, popularly called thermobaric. Instead of a conventional explosive they carry a charge that mixes with the oxygen in the air once dispersed and is only then initiated. The effect therefore shows mainly as a blast wave, which reaches even spaces that are sheltered from fragments. The half-ton version with a braking parachute is dropped from low altitude, so that the carrier gets clear of the blast. The body of the bomb is for that reason conspicuously smooth, without ribbing.
Release the parts from the supports with a scalpel and sand the spots wet, with respiratory protection. The smooth body of the bomb is sensitive to every scratch, so work the sanding mark out with progressively finer grits. Wash the part in lukewarm soapy water before painting. The lettering and the color bands on munitions are usually done with a decal or with thin masking tape. It is glued with cyanoacrylate glue (super glue).
The set is supplied unassembled and unpainted. The model, glue and paints are not included in the package, unless stated otherwise.
Naši poradci a znalci sortimentu jsou připraveni odpovídat na Vaše dotazy (Po–Pá, 8–18 hod).
Zeptejte se na co potřebujete, odpovíme co nejdříve.
Texts from customers in the advice section reflect solely the opinions and views of the customers. MNF trade s.r.o. does not approve or verify customer texts in advance.
There are no questions here yet. Be the first to ask!
