The FAB-250M-54 bomb with a multiple ejector rack 1:32 is a 3D printed resin set of aerial bombs of the 250 kilogram class with a multiple ejector rack, in 1:32 scale.
Responsibility details are not available.
The set combines 3D printed resin replicas of the FAB-250M-54 bomb with a multiple ejector rack, on which an aircraft carries several bombs on one pylon. In 1:32 scale this is an accessory for the underwing armament, not a model of an aircraft. The print holds the smooth body of the bomb as well as the small lugs and linkages of the rack.
The FAB-250M-54 is a Soviet high-explosive fragmentation aerial bomb of the 250 kilogram weight class, of a design from the middle of the 1950s. The multiple ejector rack of the MBD3 series can lift up to six bombs of the fifty to two hundred fifty kilogram class and is used on the Su-24M, Su-27 and Su-30 aircraft. The combination of the rack with the bombs gave a tactical aircraft a considerably greater load than individual pylons. In pictures of machines with a full load the rack is one of the most conspicuous elements.
First wash the 3D printed parts in warm water with a little dish soap, so that they are rid of the residue of printing resin. Cut the supports off with a sharp blade or a fine saw as close to the part as possible and sand the marks down with your airways protected. Resin does not bond with cement for polystyrene, so use cyanoacrylate glue. Lay a thin coat of primer on before painting, otherwise the paint holds poorly on a smooth print. Assemble and paint the weapons separately and glue them onto the pylon only once the varnish has dried, so that the fine surfaces are not rubbed.
The set is supplied unassembled and unpainted. Glue, paints and accessories are not included in the package, unless stated otherwise.
Naši poradci a znalci sortimentu jsou připraveni odpovídat na Vaše dotazy (Po–Pá, 8–18 hod).
Zeptejte se na co potřebujete, odpovíme co nejdříve.
Texts from customers in the advice section reflect solely the opinions and views of the customers. MNF trade s.r.o. does not approve or verify customer texts in advance.
There are no questions here yet. Be the first to ask!
