The set of sensors and antennas for the MiG-31 in 1:48 scale is a 3D-printed resin accessory from Temp Models.
Responsibility details are not available.
A resin set of sensors and antennas for a model of the MiG-31 interceptor in 1:48 scale from the Russian brand Temp Models. These are the small protruding items on the airframe, which in plastic tend to be needlessly thick, because a thinner shape would not come out of the mold. Printed resin manages fine sections. It is not an aircraft kit but an accessory for a finished model.
The MiG-31 is a two-seat interceptor built around a powerful radar and around long-range missiles. Besides the usual air data probes and communication antennas it therefore also carries items tied to the data link between machines: a group of aircraft on patrol could hand targets to one another and cover a belt hundreds of kilometers wide. On the airframe this equipment shows as an array of small antennas and sensors on the spine, on the sides and on the vertical tails.
Work over a surface and with tweezers that have smooth jaws. Cut the supports off with a new blade; never break them. Cut off the original plastic stubs from the kit and smooth the area. Fit the parts only once the varnishing is finished, so that masking tape does not catch on them. Apply the glue with a pin in the tiniest drop.
The set is supplied unassembled and unpainted. The model, glue and paints are not included in the package, unless stated otherwise.
Naši poradci a znalci sortimentu jsou připraveni odpovídat na Vaše dotazy (Po–Pá, 8–18 hod).
Zeptejte se na co potřebujete, odpovíme co nejdříve.
Texts from customers in the advice section reflect solely the opinions and views of the customers. MNF trade s.r.o. does not approve or verify customer texts in advance.
There are no questions here yet. Be the first to ask!
