The wheel set for the Su-35 1:32 is a 3D printed resin set of landing gear wheels for a model of the Su-35 fighter in 1:32 scale with weighted tires.
Responsibility details are not available.
A resin 3D printed set replaces the landing gear wheels of a model of the Su-35 in 1:32 scale. The wheels show the deformation of the tire under the weight of the aircraft. The set of the same name with the 3D suffix is cut for the 3D printed landing gear legs from Temp Models; this variant states no such tie.
The Su-35 is a deeply upgraded single-seat fighter of the Su-27 family with new avionics and engines with a vectoring nozzle. Against the original Su-27 it has a higher take-off weight and a strengthened landing gear that can take it. The nose leg carries a pair of wheels and the main legs retract into the fuselage. On a machine standing still the tires are clearly settled, and it is precisely this detail that does the most for a finished model.
First wash the 3D printed parts in warm water with a little dish soap, so that they are rid of the residue of printing resin. Cut the supports off with a sharp blade or a fine saw as close to the part as possible and sand the marks down with your airways protected. Resin does not bond with cement for polystyrene, so use cyanoacrylate glue. Lay a thin coat of primer on before painting, otherwise the paint holds poorly on a smooth print. Fit the weighted wheels so that the flattened part of the tire sits on the surface, otherwise the model does not stand naturally.
The set is supplied unassembled and unpainted. Glue, paints and accessories are not included in the package, unless stated otherwise.
Naši poradci a znalci sortimentu jsou připraveni odpovídat na Vaše dotazy (Po–Pá, 8–18 hod).
Zeptejte se na co potřebujete, odpovíme co nejdříve.
Texts from customers in the advice section reflect solely the opinions and views of the customers. MNF trade s.r.o. does not approve or verify customer texts in advance.
There are no questions here yet. Be the first to ask!
