Figures of Russian Air Force pilots in the flight position, 1:72 scale, set number 4 are 3D-printed figures from Temp Models.
Responsibility details are not available.
A set of 3D-printed resin figures of Russian Air Force pilots in 1:72 scale from Temp Models. Unlike standing figures, these ones are modeled in the flight position, that is seated, so that they can be fitted into the cockpit of a model. It is not an aircraft model but the crew for it.
An empty cockpit is easy to spot on a model, especially when you are building an aircraft in its flying form with the canopy closed and the gear retracted. A seated figure solves that problem and gives a model both scale and action. A pilot in a cockpit is not just a figure in a seat, though: he is holding the control stick, his head is in a helmet with an oxygen mask and the straps of the restraint system run across his chest.
Test fit the figure into the cockpit dry before you glue anything, because the space under the canopy tends to be tight. Cut the supports off with a sharp scalpel and sand the marks. It is glued with cyanoacrylate glue (super glue). Paint the figure away from the model and fit it only when it is finished. In a small scale the helmet and the mask are the only things that are really visible under the canopy, so concentrate your attention on them.
The figures are supplied unassembled and unpainted. Glue, paints and the aircraft model are not included in the package, unless stated otherwise.
Naši poradci a znalci sortimentu jsou připraveni odpovídat na Vaše dotazy (Po–Pá, 8–18 hod).
Zeptejte se na co potřebujete, odpovíme co nejdříve.
Texts from customers in the advice section reflect solely the opinions and views of the customers. MNF trade s.r.o. does not approve or verify customer texts in advance.
There are no questions here yet. Be the first to ask!
