Air Valve for Premium Mobius

Air valve for the Premium Mobius airbrush

The air valve is the part that governs the first movement of the trigger on an airbrush. When the trigger is pressed it opens the passage for air, and when the trigger is released it closes it again. When the valve loses its seal, it shows in typical ways: the airbrush hisses even after the trigger is released, the trigger offers uneven resistance or it does not return to its starting position. The valve is an assembly of several components, including a spring and a seal, so in practice it is replaced as a whole. This part is intended for airbrushes of the Premium Mobius line, not for the other lines of the same brand.

Use

• Before replacing it, take the airbrush apart according to the manufacturer's instructions and lay the parts out in order.
• Unscrew the valve gently; the thread in the body of the airbrush is soft and strips easily.
• Clean the seating face of dried paint, otherwise even a new valve will not seal.
• Tighten the new valve by hand, not with a wrench.
• After assembly, test the seal without paint and only then spray.
• Do not throw the old seal away straight away; it helps when comparing the size of the new part.

Who it is for

The spare part is for owners of airbrushes of the Premium Mobius line whose airbrush has stopped holding air. Before buying, check that your model matches the designation in the product name, because the valves differ between the individual lines of the same brand and the wrong part will not fit.

Keep out of the reach of children. When taking the airbrush apart and cleaning it, work in a ventilated room and protect your airways.