This set of blanking plugs and wheel chocks for the MiG-29 in 1:72 holds covers for the intakes and the nozzles and chocks to go under the wheels. It is an accessory for a model, not an airplane model.
Responsibility details are not available.
A detail set from the Russian manufacturer Temp Models in 1:72 scale, printed from photopolymer. According to the manufacturer it holds blanking plugs for the air intakes, the exhaust nozzles and the upper intake, which protect the engine from foreign objects, dust and dirt getting in, and further wheel chocks with which a parked aircraft is secured against moving.
A parked jet aircraft is always plugged on the apron. Colored covers are pushed into the intakes and the nozzles so that no dust, moisture or foreign object gets inside that could wreck the compressor on start-up. The MiG-29 also has auxiliary intakes on the upper side of the forward wing root, which opened while taxiing on a dusty surface, and those too are covered on the apron. The wheels are secured with chocks.
Cut the print supports away with a scalpel and sand the pad. Glue the parts with cyanoacrylate glue, that is with super glue. In practice the plugs were painted in conspicuous warning shades, most often red, and often carried ribbons with lettering, so on an otherwise gray model they catch the eye at once. According to the manufacturer the nozzle covers are shaped for the nozzles from its own set. Sanding is best done wet and with respiratory protection.
The set is supplied unassembled and unpainted. Glue, paints and the base model are not included in the package, unless stated otherwise.
Naši poradci a znalci sortimentu jsou připraveni odpovídat na Vaše dotazy (Po–Pá, 8–18 hod).
Zeptejte se na co potřebujete, odpovíme co nejdříve.
Texts from customers in the advice section reflect solely the opinions and views of the customers. MNF trade s.r.o. does not approve or verify customer texts in advance.
There are no questions here yet. Be the first to ask!
