The airfield standing ladder for the Su-27 in 1:48 scale is a 3D-printed resin accessory from Temp Models. An accessory for a model, not an aircraft model.
Responsibility details are not available.
A resin model of the airfield standing ladder for the Su-27 in 1:48 scale from the Russian brand Temp Models. The ladder serves the pilot for getting in and out and the ground crew for working on the cockpit. Printing in resin holds the thin rungs and the frame in one piece, so there is no building up from wire. It is not an aircraft model but an accessory for the flight line or a diorama.
The Su-27 is a heavy twin-engined fighter with the cockpit set high above the ground. The ground crew therefore bring a separate standing ladder up to the machine, which folds against the fuselage and is driven away again once the pilot is aboard. In photographs from an airfield the ladder is almost a permanent part of the scene: it leans against the side of the fuselage next to the cockpit and gives the viewer a sense of how large the machine really is.
Release the thin parts from the supports carefully and over a working surface, so that they do not fly off. Sand the burrs with fine abrasive paper, wet. Glue the assembly with cyanoacrylate glue on a flat surface, otherwise the ladder will stand crooked. Ground equipment is scuffed and dirty, so after the base color suggest chipping on the edges and settle dust on the feet with pigment.
The set is supplied unassembled and unpainted. The model, glue and paints are not included in the package, unless stated otherwise.
Naši poradci a znalci sortimentu jsou připraveni odpovídat na Vaše dotazy (Po–Pá, 8–18 hod).
Zeptejte se na co potřebujete, odpovíme co nejdříve.
Texts from customers in the advice section reflect solely the opinions and views of the customers. MNF trade s.r.o. does not approve or verify customer texts in advance.
There are no questions here yet. Be the first to ask!
