Landing gear legs for the Su-35 in 1:48 scale are a 3D-printed resin accessory from Temp Models, reinforced with steel pins.
Responsibility details are not available.
A resin set of landing gear legs for a model of the Su-35 fighter in 1:48 scale from the Russian brand Temp Models. For the sets in this series the manufacturer states printing from a strong polymer reinforced with steel pins, and the extended position with the lines, the landing lights and a fender picked out. It is not an aircraft kit but replacement parts for your own model.
The Su-35 is the most capable single-seat machine of the Su-27 family, with a new airframe, more powerful engines and a higher takeoff weight. The main landing gear legs retract forward into the fuselage, the nose leg under the cockpit. On a parked aircraft the legs are full of hydraulics, struts and wiring and a viewer looks them over from every side, so it pays to give them attention.
Release the parts from the supports with a scalpel and level the mating faces. Wash the resin in lukewarm soapy water before painting. Spray the legs before fitting and bring the lines out with a dark tone run into the recesses. A faint oil weep around the shock struts and dust on the lower parts will lend a leg credibility.
The set is supplied unassembled and unpainted. The model, glue and paints are not included in the package, unless stated otherwise.
Naši poradci a znalci sortimentu jsou připraveni odpovídat na Vaše dotazy (Po–Pá, 8–18 hod).
Zeptejte se na co potřebujete, odpovíme co nejdříve.
Texts from customers in the advice section reflect solely the opinions and views of the customers. MNF trade s.r.o. does not approve or verify customer texts in advance.
There are no questions here yet. Be the first to ask!
