The Tamiya fine drill bit 0.2 mm (shank 1.0 mm) is a very fine twist drill with a thin working diameter of 0.2 mm and a thicker shank of 1.0 mm for a reliable grip in an ordinary pin vise.
Responsibility details are not available.
A very fine twist drill from the brand Tamiya with a working diameter of 0.2 mm. The thin working section runs smoothly into a thicker shank 1.0 mm in diameter, so the drill can be gripped safely in a standard pin vise and in ordinary collets. The thicker shank also increases the resistance to breaking and helps to keep the drilling axis accurate.
For modelers who detail kits and need really small, clean holes. The working diameter of 0.2 mm is very fragile, so drill perpendicular to the surface, without side pressure and with only moderate force.
The drill is very thin and fragile, and it may break if it is bent or levered. Keep out of the reach of children.
Naši poradci a znalci sortimentu jsou připraveni odpovídat na Vaše dotazy (Po–Pá, 8–18 hod).
Zeptejte se na co potřebujete, odpovíme co nejdříve.
Texts from customers in the advice section reflect solely the opinions and views of the customers. MNF trade s.r.o. does not approve or verify customer texts in advance.
There are no questions here yet. Be the first to ask!
