Large Surface Sanding Stick from the manufacturer AMMO of Mig Jimenez is a wide sanding stick with three grits (320/600/4000) for sanding large areas evenly. It is a modeling tool, not a kit.
Responsibility details are not available.
Large Surface Sanding Stick is a modeling tool, not a kit. It comes as one piece and carries three different grits: 320, 600 and 4000. Each abrasive area is distinguished by color, so you can tell at a glance which side you are holding. The material is springy and adapts even to rounded shapes; the coarser grits cope not only with plastic but also with resin, metal and wood. The finest side, with a grit of 4000, serves for polishing and suits cleaning up clear parts as well as work on an already painted surface.
The key here is the width of the abrasive area. A wide tool spreads the pressure, so it sands evenly and does not create hollows; a narrow stick or a file easily digs in on a large area and leaves ripples which then show mercilessly under gloss varnish. That is why this stick is the first choice for long fuselage seams, wings, vehicle bodies and large panels. With grit numbers a simple rule applies: a lower number means a coarser abrasive, a higher number a finer one. You always work from coarser to finer and never the other way round, because a fine grit will no longer smooth out the scratches left by a coarse one, it will only polish them, and they will then stay visible in the paint.
For modelers who build larger models and need to get large areas genuinely level: aircraft with a seam running the whole length of the fuselage, vehicles, ships and larger figure bases. A beginner learning to get rid of seams will appreciate it, as will an experienced builder who wants to prepare a surface for gloss varnish. Rinse the stick after work and let it dry, because it is meant for repeated use.
Sanding creates a fine dust, which you should not inhale. Work in a ventilated space, protect your airways and, if the surface allows it, sand wet.
Naši poradci a znalci sortimentu jsou připraveni odpovídat na Vaše dotazy (Po–Pá, 8–18 hod).
Zeptejte se na co potřebujete, odpovíme co nejdříve.
Texts from customers in the advice section reflect solely the opinions and views of the customers. MNF trade s.r.o. does not approve or verify customer texts in advance.
There are no questions here yet. Be the first to ask!
