Plastruct Profile L (H 3.2 mm, W 3.2 mm, T 0.8 mm, L 375 mm) is a styrene angle shaped like the letter L for model building, conversions and dioramas.
Responsibility details are not available.
A styrene (polystyrene) profile shaped like the letter L, that is an angle, from Plastruct. The legs are 3.2 mm high (H) and 3.2 mm wide (W), the material is 0.8 mm thick (T) and the bar is 375 mm long (L). It is a modeling semi-finished material, not a kit. This equal-leg L-profile suits corners, edgings, stiffeners and frames on mock-ups of buildings, bridges and ships and in dioramas.
The profile is parted with a sharp blade or a modeling saw and the cuts are leveled by sanding. It is glued with ordinary cement for polystyrene or with cyanoacrylate glue. The material can be painted like plastic models, best with a primer before the top coats.
For modelers and mock-up builders who need a dependable styrene angle for modifications, conversions and building dioramas and architectural models.
This is a modeling material (a plastic profile), not a kit. Paints and glue are not included in the package.
Naši poradci a znalci sortimentu jsou připraveni odpovídat na Vaše dotazy (Po–Pá, 8–18 hod).
Zeptejte se na co potřebujete, odpovíme co nejdříve.
Texts from customers in the advice section reflect solely the opinions and views of the customers. MNF trade s.r.o. does not approve or verify customer texts in advance.
There are no questions here yet. Be the first to ask!
