Photo-etched parts for a model of the Scammell Commander heavy tractor with a 62 t semitrailer in 1:35 scale. An accessory to a finished kit.
Responsibility details are not available.
The Scammell Commander is a British heavy tractor intended for transporting tanks. With a semitrailer rated at 62 tonnes it makes up a rig that will carry a fighting vehicle by road to where it would otherwise only get at the cost of wear on its running gear and a great deal of fuel. The rig is unusually long and massive, and that is exactly why it makes a rewarding model: standing next to an ordinary tank on a shelf, it shows at once what a large machine it is.
A set of photo-etched parts in 1:35 scale for a model of the tractor and its semitrailer. The etched metal replaces the sections that would come out disproportionately thick in plastic and adds shapes that cannot be produced in a kit. Which parts the fret holds, where they belong and which kit the set is prepared for are given in the manufacturer's instructions.
Lay the fret on a hard surface and separate the parts from it by cutting through the tab with a sharp blade, not by breaking them out. Make the bends in an etch bender or against the edge of a steel rule, and do so in one movement. For gluing, a minute amount of super glue applied with the tip of a wire is enough; any surplus will show under the part as a white veil. Wash and degrease the metal before painting and use a primer intended for metal, otherwise the coat will soon flake off the edges.
The kit of the rig, paints and glue are not part of the delivery, unless stated otherwise.
Naši poradci a znalci sortimentu jsou připraveni odpovídat na Vaše dotazy (Po–Pá, 8–18 hod).
Zeptejte se na co potřebujete, odpovíme co nejdříve.
Texts from customers in the advice section reflect solely the opinions and views of the customers. MNF trade s.r.o. does not approve or verify customer texts in advance.
There are no questions here yet. Be the first to ask!
