STREAKING GRIME

STREAKING GRIME from AMMO of Mig Jimenez is an enamel effect with a 35 ml volume for creating vertical streaks of dripping grime and dried water on the sides of vehicles. It is modeling chemistry, not a kit.

Manufacturer AMMO of Mig Jimenez
Product EAN8591111712033

Responsibility details are not available.

3.96 €
3.27 € without VAT
In stock
Free shipping on orders over 1,000 czk in czech republic Personal pickup in Prostějov 14-day returns

About product

STREAKING GRIME — Enamel Dripping-Grime Effect (AMMO of Mig Jimenez)

STREAKING GRIME is a ready-to-use enamel (synthetic, solvent-based) effect in a bottle with a volume of 35 ml that dries matte. It is not a kit, but a modeling chemical for weathering finished models. The dirty gray shade is intended for creating vertical streaks of grime and dried water, like those that run down the sides of a hull, turret or fuselage on real equipment — under rivets, around hatches, below drip edges, hatches and protrusions. These vertical streaks are exactly what give a model scale and believability, since the eye instantly reads the direction of gravity and understands that the vehicle stood out in rain and dust.

Use

  • Mix the bottle thoroughly before use.
  • Apply vertical strokes from top to bottom with a fine brush — start below rivets, hatches, clasps, hinges and edges, where grime would realistically run from.
  • Let it tack up briefly, then use a clean brush lightly moistened in enamel thinner to blend the strokes from top to bottom until a soft, naturally faded dripping effect appears.
  • Wipe the brush often while blending — otherwise you will just spread the grime over the surface.
  • Do not make the streaks regular or equal in length; irregularity is the key to realism.

Recommended base

Apply it over a cured gloss or semi-gloss varnish — only from a smooth, fully dry surface can the excess be blended cleanly and with control, and removed entirely if needed. On a matte surface the effect soaks in and blends unevenly. Once the weathering is finished, seal the model with a matte varnish.

Who it is for

For modelers of tanks, armored vehicles, trucks, diorama equipment, ships and aircraft who want realistic, layered weathering. It pairs excellently with washes and precedes or complements dust effects. Thanks to the ability to correct it with thinner, the application is friendly even for beginners.

Solvent-based modeling chemistry — flammable. Work in a well-ventilated area, protect your skin and airways, avoid contact with eyes. Keep out of the reach of children and away from sources of fire and open flame.

Reviews

No reviews yet Have you built this one? Tell other modellers how it went and help them choose.

Forum

Naši poradci a znalci sortimentu jsou připraveni odpovídat na Vaše dotazy (Po–Pá, 8–18 hod).
Zeptejte se na co potřebujete, odpovíme co nejdříve.

Texts from customers in the advice section reflect solely the opinions and views of the customers. MNF trade s.r.o. does not approve or verify customer texts in advance.

There are no questions here yet. Be the first to ask!

FAQ

Mix the bottle, apply vertical strokes from top to bottom with a fine brush (below rivets, hatches and edges), let it tack up briefly, then blend the strokes top to bottom with a clean brush moistened in enamel thinner until a soft, naturally faded transition appears.

Because grime and dried water run down real equipment under gravity. A vertical direction, irregular length, and starting points below rivets, hatches and edges are what make the effect believable.

Onto a fully cured gloss or semi-gloss varnish. The effect can be cleanly blended, or fully removed, from a smooth surface. On a matte surface it soaks in and the result is uneven.

Yes. It is typically layered: first a wash to highlight details, then dripping grime, and finally dust effects. Always let the previous layer dry first.

Last seen

AMMO of Mig JimenezA.MIG-1203

STREAKING GRIME

STREAKING GRIME from AMMO of Mig Jimenez is an enamel effect with a 35 ml volume for creating vertical streaks of dripping grime and dried water on the sides of vehicles. It is modeling chemistry, not a kit.
In stock
3.96 €
LifecolorLIFUA263

UA263 - Grease Effect

In stock
2.76 €
Abteilung 502ABT1106

MAGENTA

In stock
5.56 €
BUFF DARK SHADE-25 %Stock ClearanceFavorite
AK interactiveAK4007

BUFF DARK SHADE

AK Buff Dark Shade is an acrylic modeling paint in a 17 ml bottle. A darker beige (buff) shade for the accessories and equipment of military hardware, water-thinnable.
Last one!of 3
3 €2.24 € You save 0.76 €
MontexMXSM320341:32

1:32 P-40E

A set of masks for the densely framed cockpit of the P-40E in 1:32 scale, for both faces of the clear parts.
In stock
6.36 €
Loading, please wait...

Setting consent to personalization

With your consent, we may use the information below for the following purposes or share it with selected partners. You can adjust your settings for individual purposes (types of processing) and confirm your choice with the "Save settings" button:

Always active

Necessary cookies

These are technical files that are necessary for the correct behavior of our website and all its functions. They are used, among other things, to store products in the shopping cart, display products on request, control filters, personal settings and also set consent to the use of cookies. Your consent is not required for these cookies and it is not possible to remove it.

Analytical cookies

They count website traffic and, by collecting anonymous statistics, enable the operator to better understand their visitors and thus constantly improve the site.

Marketing cookies

They collect information to better tailor advertising to your interests, both on and off this website.

Setting consent to personalization

To make it easier for you to browse the site, to offer you customized content or advertising, and to analyze traffic anonymously, we use cookies that we share with our partners for social media, advertising, and analytics. You can adjust their settings with the "Edit settings" link and you can change it at any time in the footer of the website. You can find more detailed information in our Policy on the protection of personal data and the use of cookies.