A Lifecolor modeling paint in the NATO Black shade per the American Federal Standard, number 37030.
Responsibility details are not available.
NATO Black is a black shade listed in the American Federal Standard under the number 37030. It is used as one of the elements of the three-color camouflage scheme carried by the vehicles of NATO armies; against a pure black it is less saturated, so on a model it does not read as a hole and keeps the drawing of shapes even in shadow.
Shake the bottle thoroughly before use. Thin the paint with the thinner intended for this line and in the ratio instructed by the manufacturer on the packaging; thinning outside those instructions can impair adhesion. Dark shades cover well but bring out every unevenness of the ground, so sand and degrease the surface before painting. It also pays to spray a primer, on which any scratches will show up sooner than in the last coat.
Apply in several thin coats and let the paint flash off between them; one heavy coat floods the fine surface detail. In a camouflage scheme the black is usually sprayed last and only in narrow bands, because it dominates the other fields optically. Give the area a gloss varnish before the decals, and once finished even out the gloss as needed.
The paint is intended for builders of military vehicles and aircraft who keep to standardized shades and want a tone that can be looked up by number. Close the bottle carefully after work and store it cool, out of the reach of children. Thinner, brushes and other accessories are not included, unless stated otherwise.
Naši poradci a znalci sortimentu jsou připraveni odpovídat na Vaše dotazy (Po–Pá, 8–18 hod).
Zeptejte se na co potřebujete, odpovíme co nejdříve.
Texts from customers in the advice section reflect solely the opinions and views of the customers. MNF trade s.r.o. does not approve or verify customer texts in advance.
There are no questions here yet. Be the first to ask!