Wide V-grooves every two millimeters on half-millimeter plastic. The sheet area is 15 x 30 cm.
Responsibility details are not available.
The groove step reaches two millimeters, which is a conversion of eighty thousandths of an inch. The grid is already pronounced enough to work even over a large area, and yet it stays thin, so it can be glued onto a finished wall as cladding without increasing the thickness of the corners. The longer side of the sheet measures thirty centimeters.
In 1:35 scale one strip works out at seven centimeters, in 1:24 scale at 4.8 cm and in 1:48 scale at 9.6 cm. Those are the dimensions of the planks on the inner lining of a field workshop, of prewar hangar walls or of a tall tool chest. In larger figure scales it also makes a floor on which the movement of the boards shows between individual strips.
What helps most is not ending the cladding in a sharp cut: let the lower edge overhang the footing and cover it at the top with a strip. Scribe irregular lines along the grain into a few strips with the point of a scriber and bend one of them slightly, so that the wall is not straight as a ruler. Choose the paint darker than you expect, as it always lightens after a dry brush. A workshop wall also calls for a few small things: a shelf from an offcut, a nail with a chain hanging on it and a greasy stain from spilled oil under the workbench.
Naši poradci a znalci sortimentu jsou připraveni odpovídat na Vaše dotazy (Po–Pá, 8–18 hod).
Zeptejte se na co potřebujete, odpovíme co nejdříve.
Texts from customers in the advice section reflect solely the opinions and views of the customers. MNF trade s.r.o. does not approve or verify customer texts in advance.
There are no questions here yet. Be the first to ask!
