Screws with a straight slot 0.7 mm are a fine 3D-printed accessory from the Czech manufacturer Firma49: a set of miniature imitation slotted screws for super-detailing models.
Responsibility details are not available.
This is a finely 3D-printed accessory from the Czech manufacturer Firma49, not a model on its own. The set contains imitations of screws with a straight slot (for a flat screwdriver) 0.7 mm in diameter. They are sold by physical size and suit places where the screw is to be somewhat more pronounced: on larger vehicles, coarser surfaces or in the middle scales.
Separate the individual parts carefully from the print carrier and fit them with tweezers so that the slots look natural. Glue with a small amount of cyanoacrylate glue. Degrease the surface before painting and apply a primer; then pick the slot out with a wash.
For modelers who want to replace simplified moldings with true slotted screws with somewhat more pronounced detail, whether on vehicles, on ships or in a diorama.
The accessory is supplied unpainted. The base model, glue and paints are not included in the package.
Naši poradci a znalci sortimentu jsou připraveni odpovídat na Vaše dotazy (Po–Pá, 8–18 hod).
Zeptejte se na co potřebujete, odpovíme co nejdříve.
Texts from customers in the advice section reflect solely the opinions and views of the customers. MNF trade s.r.o. does not approve or verify customer texts in advance.
There are no questions here yet. Be the first to ask!
