1:100 Wz.28 (late) w. Hotchkiss MG

Wz. 28 late version with the Hotchkiss machine gun 1:100 is a kit of the Polish armored vehicle in its machine-gun form from Zebranomodel.

Scale1:100
Manufacturer Zebranomodel
Product EAN8591111000000

Responsibility details are not available.

7.96 €
6.58 € without VAT
In stock
Free shipping on orders over 1,000 czk in czech republic Personal pickup in Prostějov 14-day returns

About product

Wz. 28 late version with the Hotchkiss machine gun in 1:100 scale

A kit of the Polish wz. 28 armored car in its late form, armed with a Hotchkiss machine gun, in 1:100 scale from Zebranomodel. The maker works the individual variants up separately, so a whole group of Polish interwar equipment can be built. The small scale suits extensive collections, small dioramas and gaming with models.

The real subject

The wz. 28 was a Polish half-track armored car built on a chassis derived from the Citroën-Kégresse design. It had a rotating turret and thin armor reckoning on small-arms rounds and splinters. The armament differed between batches, with some of the vehicles carrying a light gun and some a machine gun, and this model corresponds according to the name to the machine-gun form. The half-track running gear did not prove itself in service and a large part of the vehicles was later rebuilt onto a purely wheeled chassis. The cars served with the reconnaissance units of cavalry formations.

Building and painting tips

Start from the running gear, which on a half-track vehicle is the most complicated part and becomes hard to reach once the hull is closed. Cut the parts off leaving a margin and clean them up away from the sprue. For injection-molded plastic, thin modeling cement applied in drops is enough; with resin parts wash them free of release agent and glue them with cyanoacrylate. The machine gun barrel is extremely fragile in this scale, so fit it at the very end. Lay the base on thinly, thin the paint well and keep the weathering restrained, with the emphasis on the running gear and the lower edges.

Who the model is for

  • Collectors of Polish interwar equipment in 1:100 scale
  • Modelers who put both armament variants side by side
  • Builders of small dioramas and tabletop gaming groups
  • Anyone after a quick project for one or two evenings

The model is supplied unassembled and unpainted. Glue, paints and accessories are not included in the package, unless stated otherwise.

Reviews

No reviews yet Have you built this one? Tell other modellers how it went and help them choose.

Forum

Naši poradci a znalci sortimentu jsou připraveni odpovídat na Vaše dotazy (Po–Pá, 8–18 hod).
Zeptejte se na co potřebujete, odpovíme co nejdříve.

Texts from customers in the advice section reflect solely the opinions and views of the customers. MNF trade s.r.o. does not approve or verify customer texts in advance.

There are no questions here yet. Be the first to ask!

FAQ

According to the name it is a vehicle armed with a Hotchkiss machine gun. The other item of the same line does not give the armament in its name.

The build is simple, but the parts are very small in 1:100 scale. Tweezers, a sharp scalpel and good light help.

The contents of the package, that is the number of parts, the material and whether decals are included, are stated on the packaging.

No. It is supplied unassembled and unpainted; paints and glue are not included in the package.

Last seen

ZebranomodelZE1000761:100

1:100 Wz.28 (late) w. Hotchkiss MG

Wz. 28 late version with the Hotchkiss machine gun 1:100 is a kit of the Polish armored vehicle in its machine-gun form from Zebranomodel.
In stock
7.96 €
AiresAIR48101:48

1:48 F-104G Starfighter cockpit set (M.B. GQ-7A ej. seat)

A resin cockpit set for the F-104G Starfighter in 1:48 scale with a Martin-Baker GQ-7A ejection seat. A detail accessory, not an aircraft model.
In stock
16.80 €
Planet modelsPLT2811:72

1:72 Tai-atari Yūyoku Funshindan Japanese Rocket Plane (project 1 and 2)

A short-run resin (3D printed) kit for experienced modelers of the Japanese Tai-atari Yuyoku Funshindan project in 1:72 scale from the maker Planet Models. The package holds parts for two variants of the piloted rocket machine and their trolleys.
In stock
35.16 €
ReskitRSU48-03571:48

1:48 600 Gallon Wing Fuel Tanks For F-16 (2pcs) (3D Printed)

The 600 gallon wing fuel tanks for the F-16 (2 pieces) are a 3D-printed resin set for experienced modelers in 1:48 scale.
In stock
21.56 €
GasPatch modelsGP14-480651:48

1:48 WWI Vickers British Hyland Type E Standard & Reversed Ammo Feed (2pcs, Resin)

GasPatch 1:48 Vickers Hyland Type E, standard and reversed ammo feed is a pair of resin miniatures of the British Vickers aircraft machine gun of the First World War. A detail armament accessory, not an airplane model.
In stock
7.96 €
1:32 F-35A Lightning II male pilot (in a standing position- type 1)-25 %Stock ClearanceFavorite
ReskitRSF32-00221:32

1:32 F-35A Lightning II male pilot (in a standing position- type 1)

Reskit 1:32 F-35A Lightning II male pilot (in a standing position- type 1) is a figure accessory for aircraft models in 1:32 scale. The name gives a male pilot standing, the type 1 variant.
5 left
14.76 €11.08 € You save 3.68 €
Q Posket - Disney Dreamy Style Glitter Collection Vol. 2 - Cinderella-25 %Stock ClearanceFavorite
BandaiBANBP18565

Q Posket - Disney Dreamy Style Glitter Collection Vol. 2 - Cinderella

Q Posket - Disney Dreamy Style Glitter Collection Vol. 2 - Cinderella is a finished collector figure of Cinderella from the Disney classic. It arrives painted from the factory and you only need to display it.
Last one!
29.56 €22.16 € You save 7.40 €
AberABR48L301:48

1:48 Barrel for 40 mm Bofors Anti Aircraft Gun

A turned 40 mm Bofors barrel in 1:48 is an accurate metal part from Aber that replaces the plastic barrel of the anti-aircraft gun.
In stock
5.16 €
J´s WorkPPA50771:35

Airbrush CAMO-MASK for 1/35 AMX-30B Camouflage Scheme

Airbrush CAMO-MASK 1:35 AMX-30B, camouflage scheme is a set of self-adhesive masking films for applying the camouflage of the tank with an airbrush.
In stock
6.76 €
Solid ScaleSS0460091:35

1:35 HEXA46 Mask for painting a HEXA camo

HEXA46 Mask for painting a HEXA camo 1:35 is a set of Solid Scale painting masks for spraying a hexagonal camouflage pattern in 1:35 scale.
In stock
15.16 €
Loading, please wait...

Setting consent to personalization

With your consent, we may use the information below for the following purposes or share it with selected partners. You can adjust your settings for individual purposes (types of processing) and confirm your choice with the "Save settings" button:

Always active

Necessary cookies

These are technical files that are necessary for the correct behavior of our website and all its functions. They are used, among other things, to store products in the shopping cart, display products on request, control filters, personal settings and also set consent to the use of cookies. Your consent is not required for these cookies and it is not possible to remove it.

Analytical cookies

They count website traffic and, by collecting anonymous statistics, enable the operator to better understand their visitors and thus constantly improve the site.

Marketing cookies

They collect information to better tailor advertising to your interests, both on and off this website.

Setting consent to personalization

To make it easier for you to browse the site, to offer you customized content or advertising, and to analyze traffic anonymously, we use cookies that we share with our partners for social media, advertising, and analytics. You can adjust their settings with the "Edit settings" link and you can change it at any time in the footer of the website. You can find more detailed information in our Policy on the protection of personal data and the use of cookies.