1:16 One wing nuts for German vehicles PE nuts with turned bolt x 26 pcs.

1:16 One wing nuts for German vehicles PE nuts with turned bolt x 26 pcs.

15.96 €
Add to Cart

1:16 One wing nuts for German vehicles PE nuts with turned bolt x 26 pcs.

1:16 One wing nuts for German vehicles is an add-on set of 26 single-wing nuts with a photo-etched body and a turned bolt. It is a detail accessory for a kit you already own, not a model.

Scale1:16
Manufacturer Aber
Product EAN8591111000000

Responsibility details are not available.

15.96 €
13.19 € without VAT
In stock
Free shipping on orders over 1,000 czk in czech republic Personal pickup in Prostějov 14-day returns

About product

Single-wing nuts for German vehicles in 1:16 scale

This set from the Polish maker Aber holds 26 single-wing nuts in 1:16 scale, combining a photo-etched body with a turned bolt. It is not a model or a kit, but a set of small metal details that a modeler will use on a model of a German vehicle he already owns. Wing nuts were found on vehicles of the period wherever something had to be released quickly by hand without tools: brackets for tools and digging equipment on the fenders, holders for spare parts, the fastening of crates and tarpaulins. In 1:16 scale they are large enough that a simplified plastic version is glaring.

Why a metal detail instead of plastic

The large 1:16 scale is unforgiving. On a part this small, injection-molded plastic always has a parting line and a rounded edge, the wing tends to be thicker than it should be, and a mark is left after it is cut from the sprue. The combination of a photo-etched wing and a turned shank, on the other hand, gives the right thickness and a sharp edge, and because it is metal it will also take sanding of the area around it without the risk of the detail being smeared away. Twenty-six pieces are enough to fit out a whole vehicle uniformly, not just the few most conspicuous places.

Building and painting tips

Have tweezers with fine tips ready and work over a surface with a raised edge, as a part this small jumps off the bench roughly once an afternoon. Cut the photo-etched parts out with a scalpel, not with pliers. Degrease the metal with alcohol before gluing. They are glued with superglue applied in an absolutely minimal amount; excess would fill the recess under the wing. Before fitting them it is practical to paint the parts separately, pinned or stuck to double-sided tape, because once they are glued to the model you can no longer reach them. Use a primer made for metal on metal parts, or the paint will come off when they are handled.

Who the set is for

  • Builders of German vehicles in the large 1:16 scale
  • Modelers who want to replace simplified plastic brackets
  • Experienced modelers used to small metal parts
  • Those who build for a display case or a competition and work on detail close up

This is an add-on set for a kit you already own. The model, paints, glue and tools are not included in the package, unless stated otherwise.

Reviews

No reviews yet Have you built this one? Tell other modellers how it went and help them choose.

Forum

Naši poradci a znalci sortimentu jsou připraveni odpovídat na Vaše dotazy (Po–Pá, 8–18 hod).
Zeptejte se na co potřebujete, odpovíme co nejdříve.

Texts from customers in the advice section reflect solely the opinions and views of the customers. MNF trade s.r.o. does not approve or verify customer texts in advance.

There are no questions here yet. Be the first to ask!

FAQ

The set holds 26 pieces, as the name indicates.

It is not. This is a set of small metal details for a kit you already own.

Superglue in a minimal amount. Cement for plastic has no effect on metal.

We recommend it. Once they are glued to the model they are hard to reach, and metal needs a primer besides.

Last seen

AberABR161081:16

1:16 One wing nuts for German vehicles PE nuts with turned bolt x 26 pcs.

1:16 One wing nuts for German vehicles is an add-on set of 26 single-wing nuts with a photo-etched body and a turned bolt. It is a detail accessory for a kit you already own, not a model.
In stock
15.96 €
MASTERAM480141:48

1:48 German aircraft machine gun MG 131 (13mm) barrels (2pcs)

MASTER 1:48 MG 131 (13 mm) barrels (2 pcs) is a set of two turned metal barrels of the German MG 131 aircraft machine gun of 13 mm caliber. It is not a model; it is a detail accessory for aircraft kits in 1:48 scale.
In stock
9.16 €
AML DecalsAMLD480171:48

1:48 Best Finnish Hawks Over Karelian Sky

1:48 Best Finnish Hawks Over Karelian Sky brings the markings of Finnish Curtiss Hawk 75 fighters used over Karelia. A printed decal sheet, not a kit.
In stock
9.16 €
PANZER ARTFI35-0291:35

1:35 Waffen-SS tank officers winter clotches set

A set of figures of German Waffen-SS tank officers in winter clothing, 1:35 scale. Made for models of ground equipment and for winter dioramas.
In stock
27.56 €
OmaskOMK670031:72

1:72 F4U Corsair mask for canvas (for Tamiya)

A masking set in 1:72 scale for a model of the F4U Corsair fighter, prepared to match the Tamiya kit.
In stock
7.56 €
HAD modelsHAD482491:48

1:48 Decal MiG-29 B/UB Hungarian main insignias

MiG-29 B/UB Hungarian main insignias is a decal set in 1:48 scale from the brand HAD Models with Hungarian national insignia for the MiG-29 B and UB. It is not a kit.
In stock
11.96 €
Aires/QuickboostQB320581:32

1:32 Beaufighter porcupine exhaust I.

Quickboost porcupine exhausts I for the Bristol Beaufighter in 1:32 scale. A resin replacement for the exhaust stubs from Aires, for more faithful detail on the engines.
In stock
6.36 €
Loading, please wait...

Setting consent to personalization

With your consent, we may use the information below for the following purposes or share it with selected partners. You can adjust your settings for individual purposes (types of processing) and confirm your choice with the "Save settings" button:

Always active

Necessary cookies

These are technical files that are necessary for the correct behavior of our website and all its functions. They are used, among other things, to store products in the shopping cart, display products on request, control filters, personal settings and also set consent to the use of cookies. Your consent is not required for these cookies and it is not possible to remove it.

Analytical cookies

They count website traffic and, by collecting anonymous statistics, enable the operator to better understand their visitors and thus constantly improve the site.

Marketing cookies

They collect information to better tailor advertising to your interests, both on and off this website.

Setting consent to personalization

To make it easier for you to browse the site, to offer you customized content or advertising, and to analyze traffic anonymously, we use cookies that we share with our partners for social media, advertising, and analytics. You can adjust their settings with the "Edit settings" link and you can change it at any time in the footer of the website. You can find more detailed information in our Policy on the protection of personal data and the use of cookies.