1:200 Main Armament for German battleship Scharnhorst: 280mm x 9; 150mm x 12; 105mm x 14

1:200 Main Armament for German battleship Scharnhorst: 280mm x 9; 150mm x 12; 105mm x 14

35.96 €
Add to Cart

1:200 Main Armament for German battleship Scharnhorst: 280mm x 9; 150mm x 12; 105mm x 14

1:200 Main armament barrels for the battleship Scharnhorst is a set of turned metal barrels of 280 mm, 150 mm and 105 mm caliber. An accessory for a plastic ship kit, not a model.

Scale1:200
Manufacturer Aber
Product EAN8591111000000

Responsibility details are not available.

35.96 €
29.72 € without VAT
In stock
Free shipping on orders over 1,000 czk in czech republic Personal pickup in Prostějov 14-day returns

About product

1:200 Turned barrels for the German battleship Scharnhorst - Aber

A set of turned metal barrels in 1:200 scale from the Polish maker Aber. According to the name it contains barrels of three calibers: nine pieces of 280 mm, twelve pieces of 150 mm and fourteen pieces of 105 mm, that is the main artillery armament of the ship including the smaller calibers. This is not a kit of the ship but replacement parts for a part-built model.

What the set is for

Barrels are the typical weak link on a model of a large warship. Injected plastic produces them in two halves, so a lengthwise parting line appears that has to be removed laboriously, and a thin cylinder is on top of that rarely perfectly straight. Turned metal removes this problem: the barrel is straight, circular in section and seamless, so it suits even a model that will later be photographed close up. On the larger calibers the muzzle is usually suggested as well, which is missing on a plastic part.

Building and painting tips

Degrease the metal parts first, otherwise the paint will not hold. They are glued with cyanoacrylate glue or with two-part epoxy, because plastic cement does not work on metal. The holes in the turrets and mounts sometimes need slight redrilling so that the barrel seats without play and still stays on the axis; check the alignment of the whole group seen from the front, because barrels turned out of line are immediately visible on the model. Use a primer for metal before painting, and only then the base shade of the hull and superstructure. Paint the smaller calibers before fitting them, since handling them once glued is risky.

Who the set is for

  • modelers building a large battleship in 1:200 scale
  • those who are bothered by parting seams and sag on plastic barrels
  • more experienced modelers used to working with metal parts
  • builders who finish the model for a display case

The set is an accessory, not a kit. The base model of the ship, glue and paints are not included in the package, unless stated otherwise. Before buying, check that the barrels fit the kit you are building.

Reviews

No reviews yet Have you built this one? Tell other modellers how it went and help them choose.

Forum

Naši poradci a znalci sortimentu jsou připraveni odpovídat na Vaše dotazy (Po–Pá, 8–18 hod).
Zeptejte se na co potřebujete, odpovíme co nejdříve.

Texts from customers in the advice section reflect solely the opinions and views of the customers. MNF trade s.r.o. does not approve or verify customer texts in advance.

There are no questions here yet. Be the first to ask!

FAQ

According to the name nine barrels of 280 mm caliber, twelve of 150 mm and fourteen of 105 mm.

Cyanoacrylate glue or two-part epoxy. Plastic cement does not dissolve metal, so it will not hold.

Sometimes yes. The holes are redrilled slightly so that the barrel seats without play. Always check that all the barrels are in line.

Last seen

AberABR200L081:200

1:200 Main Armament for German battleship Scharnhorst: 280mm x 9; 150mm x 12; 105mm x 14

1:200 Main armament barrels for the battleship Scharnhorst is a set of turned metal barrels of 280 mm, 150 mm and 105 mm caliber. An accessory for a plastic ship kit, not a model.
In stock
35.96 €
ReskitRSU72-02371:72

1:72 F‑15 Eagle/Strike Eagle (A,B,C,D,E early,J) F100-PW-220 closed exhaust nozzles for Fine Molds kit

Resin (3D-printed) closed exhaust nozzles for the F100-PW-220 engines for models of the F-15 Eagle and Strike Eagle fighter in 1:72 scale (versions A, B, C, D, E early, J). The nozzles are shaped for the Fine Molds kit.
In stock
15.16 €
CMKCMK80751:35

1:35 Marder III M - Fighting Compartment Detail Set (for Tamiya Kits / 3D-Printed)

Marder III M – fighting compartment detail set 1:35 (CMK) is a resin and 3D-printed set for adding detail to the interior of the self-propelled tank destroyer. It is not a model but an accessory to a plastic kit.
In stock
35.16 €
Quinta StudioQD351821:35

1:35 KZKT-7428 family 3D-Printed & coloured Interior on decal paper (Trumpeter)

Quinta Studio KZKT-7428 family – a 3D-printed pre-painted interior in 1:35 scale for the Trumpeter kit, with resin parts added. It is not a model but a set of details for the cab of one specific kit.
In stock
22.76 €
Quinta StudioQDS351761:35

1:35 Toyota FJ43 Land Cruiser series 3D-Printed & coloured Interior on decal paper (AK Interactive) (Small version)

The 3D-printed colored interior for the Toyota FJ43 Land Cruiser (for the AK Interactive kit), Small version is a pre-colored set of cab parts on decal backing in 1:35 scale from Quinta Studio. It is not a model but an accessory for one particular kit.
In stock
13.56 €
ReskitRS48-06071:48

1:48 AS.34 Kormoran missiles with adapters (2 pcs) (for F-104G, Tornado IDS)

AS.34 Kormoran anti-ship missiles with adapters, 1:48 (2 pieces) is a 3D-printed resin armament set with faithful detail and mounting adapters for aircraft carriers of the weapon.
In stock
17.16 €
Loading, please wait...

Setting consent to personalization

With your consent, we may use the information below for the following purposes or share it with selected partners. You can adjust your settings for individual purposes (types of processing) and confirm your choice with the "Save settings" button:

Always active

Necessary cookies

These are technical files that are necessary for the correct behavior of our website and all its functions. They are used, among other things, to store products in the shopping cart, display products on request, control filters, personal settings and also set consent to the use of cookies. Your consent is not required for these cookies and it is not possible to remove it.

Analytical cookies

They count website traffic and, by collecting anonymous statistics, enable the operator to better understand their visitors and thus constantly improve the site.

Marketing cookies

They collect information to better tailor advertising to your interests, both on and off this website.

Setting consent to personalization

To make it easier for you to browse the site, to offer you customized content or advertising, and to analyze traffic anonymously, we use cookies that we share with our partners for social media, advertising, and analytics. You can adjust their settings with the "Edit settings" link and you can change it at any time in the footer of the website. You can find more detailed information in our Policy on the protection of personal data and the use of cookies.