A pair of pressure cylinders for welding in 1:24 scale: one on its own and the other with a pressure regulator.
Responsibility details are not available.
Two pressure cylinders for welding in 1:24 scale. One is without accessories, the other has a regulator fitted, that is a valve with gauges that brings the pressure from the cylinder down to the working value. The set is an accessory for a scene; the welding machine itself and other workshop equipment are not part of it.
Into garage and workshop scenes around car models in 1:24 scale. Cylinders usually stand by a wall or by a workbench, chained or strapped in place, or lying on a cart. It is exactly such small things that give a scene its sense of size and make it convincing, because the viewer knows them from every real workshop.
If the parts are not polystyrene, they are glued with super glue; cement for polystyrene does not work on them. Cut the excess material off with a sharp blade a little away from the part and sand the remainder, so that the cylinder stands upright. Before painting, wash the parts in lukewarm water with dish soap and degrease them. Choose the color according to the real subject you are building, because the marking of gases differs from country to country. The valve and the regulator will come out with a metallic shade applied by drybrushing, and the cylinder itself will take a fair amount of scuffing and dirt around the base.
For builders of dioramas and garage scenes in 1:24 scale who are short of small equipment for a finished view. The set is small and even a beginner with super glue and tweezers will manage it.
The vehicle model, the paints and the glue are not included in the delivery, unless stated otherwise.
Naši poradci a znalci sortimentu jsou připraveni odpovídat na Vaše dotazy (Po–Pá, 8–18 hod).
Zeptejte se na co potřebujete, odpovíme co nejdříve.
Texts from customers in the advice section reflect solely the opinions and views of the customers. MNF trade s.r.o. does not approve or verify customer texts in advance.
There are no questions here yet. Be the first to ask!
