1:32 B-17B/C/D/E/F Flying Fortress wheels w/ weighted tyres type

1:32 B-17B/C/D/E/F Flying Fortress wheels w/ weighted tyres type "b" (FS) & PE hubcaps

13.56 €
Add to Cart

1:32 B-17B/C/D/E/F Flying Fortress wheels w/ weighted tyres type "b" (FS) & PE hubcaps

1:32 B-17B/C/D/E/F Flying Fortress wheels with weighted tires type b (FS) and photo-etched hubcaps are a resin replacement for the main landing gear wheels of the early Flying Fortresses. An accessory to a model, not a kit of the aircraft.

Scale1:32
Manufacturer Armory
Product EAN8591111000000

Responsibility details are not available.

13.56 €
11.21 € without VAT
In stock
Free shipping on orders over 1,000 czk in czech republic Personal pickup in Prostějov 14-day returns

About product

Type b (FS) wheels for the early B-17 in 1:32 scale (Armory)

Armory supplies the main wheels of the early Flying Fortresses as resin castings with weighted tires and adds photo-etched hub covers. This is tire type b (FS), that is a different tread and a different sidewall outline from the sister set of type a. The application is the same: the B-17B, C, D, E and F versions. It is not a model of the aircraft but a replacement part for landing gear that is already built.

Choosing the tire type

On operational machines wheels were a consumable and were changed for whatever was at hand, so one aircraft could even carry two different types. That is exactly why the manufacturer issues the same wheel with more than one tread. A period photograph of the aircraft you are building decides: watch the pattern of the tread and the shape of the sidewall. If you cannot trace the particular machine, no harm is done by choosing the type that appears most often in photographs of the unit concerned.

Fitting and painting tips

Wash the castings in warm soapy water because of any mold release residue. The casting block tends to run along the contact patch, so after cutting it off level the surface on abrasive paper laid on a flat base, so that the flattening stays even. Sand wet and use respiratory protection. They are glued with cyanoacrylate glue, and an accelerator will speed the joint up. Bend the photo-etched hub cover gently over a round handle, so that it follows the domed hub, and glue it with the smallest amount of glue, so that none runs into the fine engraving. We recommend mixing the tire to a dark gray with a hint of brown; pure black looks unnaturally harsh at 1:32 scale.

Who the set is for

  • builders of the early B-17 versions in the large 1:32 scale
  • modelers who want wheels matching a particular period photograph
  • those bothered by the parting seam on the plastic wheels from a kit
  • more experienced modelers used to working with resin and photo-etched parts

This is an accessory set, not a model of the aircraft. The kit, glue and paints are not included in the package. Check the match with the landing gear of your own model beforehand.

Reviews

No reviews yet Have you built this one? Tell other modellers how it went and help them choose.

Forum

Naši poradci a znalci sortimentu jsou připraveni odpovídat na Vaše dotazy (Po–Pá, 8–18 hod).
Zeptejte se na co potřebujete, odpovíme co nejdříve.

Texts from customers in the advice section reflect solely the opinions and views of the customers. MNF trade s.r.o. does not approve or verify customer texts in advance.

There are no questions here yet. Be the first to ask!

FAQ

The type of tire differs, that is the tread pattern and the shape of the sidewall. The application to the early B-17 versions and the scale stay the same; the choice is made according to the footwear the machine had in a photograph.

The set replaces only the wheels, not the landing gear legs. Even so, check before you buy that the axle diameter of your model matches the hole in the casting, or widen the hole with a drill.

With cyanoacrylate glue. We recommend putting a drop on the axle, fitting the wheel and checking at once that the flattened area points straight down, otherwise the model will stand crooked.

Last seen

ArmoryARAW323181:32

1:32 B-17B/C/D/E/F Flying Fortress wheels w/ weighted tyres type "b" (FS) & PE hubcaps

1:32 B-17B/C/D/E/F Flying Fortress wheels with weighted tires type b (FS) and photo-etched hubcaps are a resin replacement for the main landing gear wheels of the early Flying Fortresses. An accessory to a model, not a kit of the aircraft.
In stock
13.56 €
MH modelsMHX721181:72

1:72 Let L-410UVP Turbolet canopy airbrush mask for Kovozávody Prostějov

A mask for the cockpit and the front windows of the L-410UVP Turbolet transport aircraft for the 1:72 kit from Prostejov. Intended for the Kovozavody Prostejov kit.
In stock
5.16 €
Mf zoneMFZ-P10

Steel Cable with a diameter of 0.8 mm and a length of 1 meter

Mf zone Steel cable 0.8 mm (length 1 m) is a modeling material for rendering heavier tow and lashing ropes or control cables on models.
In stock
23.96 €
MASTERAM720881:72

1:72 F6F Hellcat - night fighters armament (.50 cal Brownings and 20mm cannon tips with flash hiders)

The set of turned metal parts MASTER 1:72 F6F Hellcat, night fighter armament holds .50 Browning machine gun barrels and 20 mm cannon muzzles with flash hiders and replaces the plastic parts of the model.
In stock
7.56 €
ELEFANTEL350821:35

1:35 SPARE STEEL WHEELS WITH MUD SHIELD FOR M26/46/47/48A1 FIRST SERIES, CONTAINS TWO WHEELS

Spare steel wheels with mud shield for the M26, M46, M47 and M48A1 of the first series, 1:35 is a resin set of two wheels from the manufacturer Elefant. It is an accessory, not a vehicle kit.
In stock
4.36 €
XtradecalX481431:48

1:48 Supermarine Spitfire Mk.Ia/Mk.1 /Mk.1 Battle of Britain 1940 Pt.1

Xtradecal 1:48 Supermarine Spitfire Mk.Ia - the first part is a decal sheet in 1:48 scale with the markings of early Spitfires from 1940. It is an accessory for a model, not a kit.
In stock
11.96 €
AFV ClubAFV735181:350

1:350 U.S. Navy LCT Mk.6 Landing Craft Tank 501 Class 1943-1945

The landing craft LCT Mk.6 of the 501 class in 1:350 scale is a plastic kit from the brand AFV Club capturing the form of the years 1943 to 1945.
In stock
19.96 €
Loading, please wait...

Setting consent to personalization

With your consent, we may use the information below for the following purposes or share it with selected partners. You can adjust your settings for individual purposes (types of processing) and confirm your choice with the "Save settings" button:

Always active

Necessary cookies

These are technical files that are necessary for the correct behavior of our website and all its functions. They are used, among other things, to store products in the shopping cart, display products on request, control filters, personal settings and also set consent to the use of cookies. Your consent is not required for these cookies and it is not possible to remove it.

Analytical cookies

They count website traffic and, by collecting anonymous statistics, enable the operator to better understand their visitors and thus constantly improve the site.

Marketing cookies

They collect information to better tailor advertising to your interests, both on and off this website.

Setting consent to personalization

To make it easier for you to browse the site, to offer you customized content or advertising, and to analyze traffic anonymously, we use cookies that we share with our partners for social media, advertising, and analytics. You can adjust their settings with the "Edit settings" link and you can change it at any time in the footer of the website. You can find more detailed information in our Policy on the protection of personal data and the use of cookies.