1:32 Douglas A-26C Invader TFace

1:32 Douglas A-26C Invader TFace is an Eduard masking set in the TFace standard, that is with masks for the outer and the inner side of the glazing. It is not a kit but an aid for painting.

Scale1:32
Manufacturer Eduard
Product EAN8591111000000

Responsibility details are not available.

13 € 9.76 €
8.07 € without VAT
−25 % You save 3.24 €
5 pcs in stock
Free shipping on orders over 1,000 czk in czech republic Personal pickup in Prostějov 14-day returns

About product

Masking set 1:32 Douglas A-26C Invader TFace from Eduard

A set of pre-cut self-adhesive masks for a large model of the twin-engine A-26 Invader in the C version in 1:32 scale. The TFace designation means that the set takes care of the glazing from both sides — besides the outer masks it contains masks shaped for the inner side. The package holds neither a model nor its parts; it is an aid made of kabuki type masking tape from the Czech firm Eduard.

The real subject

The Douglas A-26 Invader was an American twin-engine attack aircraft. The C version carries a glazed nose with a bombardier's station, so another large glazed area is added beside the pilot's cockpit and the gun turrets. In 1:32 scale all these compartments are markedly visible.

Why the TFace version and how it is used

On the real aircraft the glazing frames carry the interior shade on the inside, not the color of the external finish. If only the outside is masked, bare clear plastic shows through when you look inside — and in a large scale that is especially conspicuous. The procedure has two phases: apply the inner masks, spray the interior shade, let it dry through, then apply the outer masks and spray the external finish. Degrease the glazing beforehand, lay the masks on dry and press them down carefully round the perimeter with a stick so that paint cannot seep under the edge.

Who the set is for

  • modelers who want the glazing frames faithfully painted on the inside as well
  • a build of a large model in 1:32, where the cockpit and the nose are clearly visible
  • those who want sharp paint edges without taping by hand
  • a more advanced build with an airbrush

The package contains masking material only — the model, paints and glue are not part of it. The masks are cut to the specific shape of the glazing, so check before buying that they match the kit you are building.

Reviews

No reviews yet Have you built this one? Tell other modellers how it went and help them choose.

Forum

Naši poradci a znalci sortimentu jsou připraveni odpovídat na Vaše dotazy (Po–Pá, 8–18 hod).
Zeptejte se na co potřebujete, odpovíme co nejdříve.

Texts from customers in the advice section reflect solely the opinions and views of the customers. MNF trade s.r.o. does not approve or verify customer texts in advance.

There are no questions here yet. Be the first to ask!

FAQ

That the set takes care of the glazing from both sides. It contains masks shaped for the outer and for the inner side, so the frames visible from inside can be painted as well.

In a large scale the cockpit and the glazed nose are markedly visible, so bare transparent frames stand out. Painting them from the inside removes that shortcoming.

No. The B version has a solid unglazed nose, so the shape of the glazing differs. The set is intended for the C version.

No, this is purely a masking set. The package contains no kit, paints or glue.

Last seen

1:32 Douglas A-26C Invader TFace-25 %Stock ClearanceFavorite
EduardJX2721:32

1:32 Douglas A-26C Invader TFace

1:32 Douglas A-26C Invader TFace is an Eduard masking set in the TFace standard, that is with masks for the outer and the inner side of the glazing. It is not a kit but an aid for painting.
5 left
13 €9.76 € You save 3.24 €
Red Fox StudioRFSQS-320881:32

1:32 Tornado ECR (for Revell kit)

1:32 Tornado ECR is a set of 3D textured instrument panels from Red Fox Studio on decal paper for the tandem cockpit of the model in 1:32 scale. The panels are prepared for the Revell kit.
In stock
45.96 €
ReskitRS72-00061:72

1:72 Grumman F-14 A/B

An accessory for a model of the Grumman F-14 carrier-based aircraft in the A and B versions in 1:72 scale.
In stock
5.16 €
ETA dioramaETA3971:35

1:35 Road Signs Set

1:35 Road Signs Set is a printed paper sheet of road signs for dioramas in 1:35 scale from the firm ETA diorama. It is not a kit and not a decal – the motifs are cut out of the sheet and glued onto a stand of your own or straight onto a surface in a scene.
In stock
3.96 €
EduardEX10351:48

1:48 Blackburn Buccaneer S.2B TFace

Double-sided masks for the glazing of the Blackburn Buccaneer S.2B in 1:48 scale, TFace version.
In stock
13.80 €
MontexMXSM480361:48

1:48 P – 51 D Mustang

Templates for the glazing of the 1:48 P-51D Mustang. They cover the windscreen and the sliding teardrop canopy from both sides and are matched to the Tamiya kit.
In stock
5.16 €
HaulerHLX483381:48

1:48 Sd.Kfz.232 front bumper/spoiler (Tamiya)

A photo-etched front bumper and spoiler for the Sd.Kfz.232 in 1:48 scale is an accessory set for a plastic kit you have already bought, not a model. Thin metal replaces an oversized plastic part and gives the nose of the armored car the correctly slim profile.
In stock
7.16 €
RB modelRB200L321:200

1:200 Retwizan

RB model 1:200 — turned metal barrels for the battleship Retvizan . An accessory that replaces the plastic barrels on a model.
In stock
11.96 €
1:48 F-16C Block 25 LooK-25 %Stock ClearanceFavorite
EduardED6442071:48

1:48 F-16C Block 25 LooK

1:48 F-16C Block 25 LööK is an Eduard accessory instrument panel set for a model of the F-16C multirole combat aircraft in 1:48 scale. It is not a kit.
6 leftof 8
9 €6.76 € You save 2.24 €
Loading, please wait...

Setting consent to personalization

With your consent, we may use the information below for the following purposes or share it with selected partners. You can adjust your settings for individual purposes (types of processing) and confirm your choice with the "Save settings" button:

Always active

Necessary cookies

These are technical files that are necessary for the correct behavior of our website and all its functions. They are used, among other things, to store products in the shopping cart, display products on request, control filters, personal settings and also set consent to the use of cookies. Your consent is not required for these cookies and it is not possible to remove it.

Analytical cookies

They count website traffic and, by collecting anonymous statistics, enable the operator to better understand their visitors and thus constantly improve the site.

Marketing cookies

They collect information to better tailor advertising to your interests, both on and off this website.

Setting consent to personalization

To make it easier for you to browse the site, to offer you customized content or advertising, and to analyze traffic anonymously, we use cookies that we share with our partners for social media, advertising, and analytics. You can adjust their settings with the "Edit settings" link and you can change it at any time in the footer of the website. You can find more detailed information in our Policy on the protection of personal data and the use of cookies.